User manual ACOUSTI PACK PRE-CUT KIT FOR ANTEC SLK 3700 BQE

[. . . ] AP AntecBQE Pack Contents and Fitting Directions Pack Contents: The AcoustiPackTM AP AntecBQE contains 16 pieces, of 2 different acoustic materials and an optional washable air filter. [. . . ] Remove the uppermost 5¼-inch drive bay cover to help with access, and turn the case upside down. Peel back only a portion of the selfadhesive backing sheet and fit the front section of this part first. Once in position, fit the remainder of the part. 10 7 Opt 11 GAP 18mm 16 9 Opt 12 17 2 Opt 14 8 Opt 3 4 5 Fitting the Optional Air Filter: Position part 14 to allow adequate airflow around any hard-disks. Do not use the air filter if maximum airflow is required for cooling purposes. If the air filter is used: Remove and wash regularly to maintain an adequate airflow. 6 Press Press Position parts 2 to 6 onto the back of drive bay covers in unused drive bays. To gain access, carefully remove front cover by pressing tabs marked Press and lift the cover off. READ THIS BEFORE INSTALLING THE MATERIALS! ONLY position the materials as directed in the fitting directions and as depicted in the graphics above. [. . . ] Whilst every care has been taken to produce a set of materials that will be appropriate for the majority of component configurations, it is the responsibility of the machine builder to position materials appropriately to facilitate normal functioning of internal components. v 1. 0 PRINTED ON PAPER FROM SUSTAINABLE SOURCES. [. . . ]