User manual ACOUSTI PACK PRE-CUT KIT FOR ANTEC SONATA I

[. . . ] AP AntecSon Pack Contents and Fitting Directions Pack Contents: The AcoustiPackTM for the Antec Sonata contains 12 pieces, of 3 different materials. [. . . ] Remove the Power Supply Unit (PSU) from the case, and turn the case up-side down. Note that this part slides in to position above the motherboard tray and is adhered to the fixed side of the case. We recommend that necessary ventilation holes in the case sides are not covered over. Remove the optional cut-outs to ensure maximum case 1 ventilation. 2 3 Opt Opt Opt 12 9 11 Opt 10 5 6 Opt 8 4 7 The air filter slides into the case from underneath. Be sure to change the air filter regularly to maintain adequate airflow. Opt Optional Note: Case cooling fan and PSU are not shown above. READ THIS BEFORE INSTALLING THE MATERIALS! ONLY position the materials as directed in the fitting directions and as depicted in the graphics above. DO NOT cover any necessary ventilation holes in the case with materials. [. . . ] Whilst every care has been taken to produce a set of materials that will be appropriate for the majority of component configurations, it is the responsibility of the machine builder to position materials appropriately to facilitate normal functioning of internal components. v 1. 2a PRINTED ON PAPER FROM SUSTAINABLE SOURCES. [. . . ]