User manual ACOUSTI RACK MODELS

[. . . ] Fitting Directions: Fit according to the positions indicated, in the numerical order shown from 1 to 12 . [. . . ] If you make a mistake - it can be re-applied for a second attempt - but be aware that excessive re-application will cause a deterioration in the adhesive. Ensure you read the important safety information before installing the materials. Acoustic Foam Acoustic Barrier Mass Acoustic Composite Fit part 1 first (this is the most difficult part to fit). Remove the Power Supply Unit (PSU) from the case, and turn the case up-side down. DO NOT cover any necessary ventilation holes in the case with materials. DO NOT position the rear of the case close to a permanent heat source, such as a radiator, or very close to an airflow obstruction, such as a wall. Leave a gap at the rear of the case of at least 20cm to allow free movement of air in and out of the case. [. . . ] DO NOT position materials inside the case in such a way that may inhibit the correct functioning of any internal components, especially cooling fans, disc drives and moving parts. [. . . ]