User manual ADE SIMPLE SET READER ENGINEERING INFORMATION

[. . . ] Each keyfob is unique and can only be used if it is recongised by the reader, this provides total security. These instructions cover information on how to mount and wire the reader, how to engineer the panel and learn up to eight keyfobs to a reader and how to fully set and unset the system using a keyfob. [. . . ] Power up the intruder system and enter the User code at the system keypad to unset the system. You will hear five rapid beeps to acknowledge the reader is in the Learn mode. The learn mode will NOT timeout until the first keyfob is learnt. Ensure the reader is in the day mode with the Day light lit. You should have one learnt keyfob and the new keyfobs available. 1 2 3 By entering the learn mode in this manner you will erase all recognition of previously learnt keyfobs at the reader, except for the one used to enter the learn mode. 7 8 ZONE 4 5 6 ZONE 1 2 3 4 5 6 7 8 POWER UP THE SYSTEM x 5 rapid beeps The Day indicator should be lit at the reader. Offer a keyfob to the reader and withdraw it as soon as you hear the keyfob recognition beep tone from the local sounder. 7 8 JUMPER link removed Reader Power Day Learn Error TA PA Power Day Learn Error TA PA Hold for 10 seconds ZONE 1 2 3 4 5 6 7 8 When an unrecognised keyfob is offered to the reader it will cause the Error light to be lit and continuous sound is emitted from the local sounder. Hold the recognised `learnt' keyfob such that it touches the centre depression on the Reader and keep it there without movement for 10 seconds. You will hear a keyfob recognition beep and 10 seconds later five rapid beeps from the local sounder. The Learn light will give a flashing indication and the ZONE lights change from flashing to steady On indication to show recognised or learnt keyfob. The reader is now ready to learn the new keyfobs signalled by the next flashing ZONE indicator. In the learn mode when an already learnt keyfob is offered to the reader, an Error indication will be given. The learn mode will timeout after 10 seconds if no actions is taken to learn new keyfob Offer the new keyfob slightly touch it on the centre depression of the reader. A learnt indication is given of the new keyfob when the flashing ZONE indicator changes to steady On indication and there is a recognition beep given by the local sounder. [. . . ] Seek assistance before investigating further as intruders may still be on the premises. If you do not withdraw keyfob after it is recognised by the reader, you run the risk of entering the learn mode. x 2 beeps Power Day Learn Error TA PA Repeat to learn the next keyfob. ZONE 1 2 3 4 5 6 7 8 Keyfob recognition beep Power Day Learn Error TA PA Once all the keyfobs are recognised `learnt' by the Reader wait for just over 10 seconds and the reader will exit the learn mode, this is announced by two beeps from the local sounder and return to Day mode indication. x 2 beeps Power Day Learn Error TA PA x 2 beeps Power Day Learn Error TA PA Repeat to learn the next keyfob. ZONE 1 ZONE 1 2 3 4 5 6 7 8 2 3 4 5 6 7 8 Once all the keyfobs are recognised `learnt' by the reader wait for just over 10 seconds for the reader to exit the learn mode, this is announced by two beeps from the local sounder and return to Day mode indication. ZONE 1 2 3 4 5 6 7 8 Once all the keyfobs are recognised `learnt' by the reader wait for just over 10 seconds for the reader to exit the learn mode, this is announced by two beeps from the local sounder and return to Day mode indication. Fault finding Indication given. . [. . . ]