User manual ADVANCE ACOUSTIC MPP-202

[. . . ] CAUTION: To prevent the risk of electric shock, do not remove cover (or back); no user serviceable parts inside. THE LIGHTNING FLASH with arrow-head symbo is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Before any transportation, your product must be packed correctly in order to avoid any damage. [. . . ] SERVICING The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. CLEANING The appliance should be cleaned only as recommended by the manufacturer. POWER LINES An outdoor antenna should be located away from power lines. NON-USE PERIODS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. OBJECT AND LIQUID ENTRY Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. ON/OFF POWER BUTTON Press this button to turn ON your appliance, power is supplied to your unit and it becomes operational, the blue meters lights. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. TUNER INPUT Press this button to select the tuner as your listen source. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. BOUTON DE VOLUME VYour amplifier used a rotary type knob to control the 2 channel output sound level (left and right). Turn this volume knob clockwise to increase the ouput sound level and turn this volume knob counterclockwise to decrease the output sound level. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. [. . . ] PRE-OUT PRE-OUT: These connections allow you to connect L and R input from your power amplifier here. You also have the possibility to use on those connectors signal processors such as equalizers. BOOST EQ When Boost EQ is on, an electronic signal processor boost different bass frequencies in order to optimize sound results of small or bookshelf speakers. [. . . ]