User manual ANSMANN POWERLINE 5

[. . . ] > Do not use the device if there are signs of any damage to the housing or cable. > In order to avoid the risk of fire and/or electric shock, the charger must be protected against high humidity and water!> Before cleaning the unit, disconnect it from the mains and only use a dry cloth! [. . . ] Charging of round cells: 1 - 4 NiMH or NiCd rechargeable batteries of the sizes Micro (AAA), Mignon (AA), Baby (C) or Mono (D) can be charged. To insert round cells move the contact bridge backwards and put in the rechargeable battery at the bottom of the charging slot. Always connect the cells in the right direction for polarity according to the symbols in the charging slot. Press the START button for about 2 seconds to start the charging process. The charge status of each cell will be indicated on the LCD panel and the respective LED above each charging slot (see DISPLAY OF THE CHARGING STATUS FOR ROUND CELLS). The cells do not have to be inserted simultaneously as the charging processes are independent from each other. After charging is complete, the charger switches automatically to trickle charge. The trickle charge for all inserted cells will automatically switch off after one hour from when the last cell was fully charged (provided no 9V battery is still being charged). The charger automatically disconnects itself from the mains power by means of the intelligent Zero Watt Technology. It does not consume any electric power even if it remains in the power socket. Charging of 9V battery: One 9V Block (E) can be charged when no Mono (D) batteries are inserted to the left or right of the 9V charging slot. Battery in the correct direction for polarity according to the symbols in the charging slot. The charging indicator (LED) above the 9V charging slot lights red when the battery is inserted correctly and the START button has been pressed for about 2 seconds. After the timer for the 9V battery has timed-out, there will be an automatic mains cut off using Zero Watt Technology (if no round cells are inserted and still charging). [. . . ] Care & MaintenanCe To make sure that the charger works properly, please keep the contacts in the charging slots free from dust or contamination. To clean the unit disconnect it from the mains or Car and use only a dry cloth. DisClaiMer Information in these operating instructions can be changed without prior notice. [. . . ]