User manual ARISTON AQ9F492U

[. . . ] Instructions for installation and use Contents EN English, 1 WASHING MACHINE EN Installation, 2-3 ES Español, 13 PT Português, 25 Unpacking and levelling Connecting the electricity and water supplies Technical data Description of the machine, 4-5 Control panel DE Deutsch, 37 FR Français, 49 NL Nederlands, 61 Running a wash cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options Detergents and laundry, 8 Detergent Preparing the laundry Washing recommendations Load balancing system AQUALTIS AQ9F 492 U Precautions and advice, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water and electricity supplies Cleaning the machine Cleaning the detergent dispenser drawer Caring for your appliance drum Cleaning the pump Checking the water inlet hose Trouble shooting, 11 Assistance, 12 1 Installation EN !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] Wash options This option offers a high-performance wash due to the greater quantity of water used in the initial phase of the cycle, and due to the increased wash cycle duration, is particularly useful for the removal of stubborn 3 stains. If you 1 desire bleaching, insert the extra tray compartment (3) 2 into compartment 1. When pouring in the bleach, be careful not to exceed the “max” level marked on the central pivot (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the extra compartment 3, select the “Rinse” cycle and activate the “Super Wash” option . To end the cycle press the START/PAUSE button or the “Easy Iron” button. For the Silk wash cycle, the machine will end the cycle while the laundry is soaking and the “Easy Iron” indicator light will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the “Easy Iron” button. If you select this option, the wash cycle duration will be reduced by 30%-50%, depending on the selected cycle, thereby guaranteeing simultaneous water and energy saving. Time Saver By selecting this option, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine drum will rotate slowly; the “Easy Iron” and START/PAUSE indicator Easy Iron By selecting this option, the efficiency of the rinse is increased and optimal residual detergent removal is guaranteed. We recommend this option is used with a full load of washing, or when a large amount of detergent is required. Extra rinse 7 Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc. ), as well as its colour, the washing temperature, the level of soiling and the hardness of the water in the area. Measuring out the detergent carefully will avoid wastage and help to protect the environment: although they are biodegradable, detergents still contain ingredients which alter the balance of nature. We recommend the following: • use powder detergents for white cotton garments and pre-washing. € use liquid detergents for delicate cotton garments and for all low-temperature wash cycles. The detergent should be poured into the relevant compartment - or the dispenser placed directly inside the drum - before the wash cycle begins. In the latter case, it will not be possible to select the Cottons with pre-wash cycle. Do not use hand washing detergents because these create too much foam. Silk: use the special “Silk” wash cycle to wash all silk garments. We recommend the use of special detergent which has been designed to wash delicate clothes. These should be Curtains: use the “Silk” folded and placed inside the bag provided. [. . . ] Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. • • • • The washing machine door remains locked. € If you have selected the “Baby ” cycle or the “Easy iron ” option, when the wash cycle has finished the machine will slowly rotate the drum; to end the cycle press the START/PAUSE button or the “Easy iron ” button. [. . . ]