User manual ASUS P8H61-M2/TPM/SI R2.0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASUS P8H61-M2/TPM/SI R2.0. We hope that this ASUS P8H61-M2/TPM/SI R2.0 user guide will be useful to you.


ASUS P8H61-M2/TPM/SI R2.0 : Download the complete user guide (6399 Ko)

Manual abstract: user guide ASUS P8H61-M2/TPM/SI R2.0

Detailed instructions for use are in the User's Guide.

[. . . ] P8H61-M2/TPM/SI R2. 0 E7361_P8H61-M2-TPM-SI R2. 0_Manua1 1 Motherboard 5/16/12 1:43:39 PM E7361 First Edition (V1) May 2012 Copyright © 2012 ASUSTeK COMPUTER INC. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] These two 4-pin Universal Serial Bus (USB) ports connect to USB 2. 0/1. 1 devices. 1. 10. 2 1. These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. ATX12V +12V DC +12V DC ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) Internal connectors EATXPWR GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts P8H61-M2/TPM/SI R2. 0 +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND PIN 1 +5 Volts GND +5 Volts GND +3 Volts +3 Volts PIN 1 P8H61-M2/TPM/SI R2. 0 ATX power connectors • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2. 0 or later version and provides a minimum power of 400W. • DO NOT forget to connect the 4-pin ATX12V power plug. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support. asus. com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details. 1-22 GND GND ASUS P8H61-M2/TPM/SI R2. 0 E7361_P8H61-M2-TPM-SI R2. 0_Manua22 22 5/16/12 1:44:25 PM 2. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) CHA_FAN P8H61-M2/TPM/SI R2. 0 P8H61-M2/TPM/SI R2. 0 Fan connectors DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. Do not place jumper caps on the fan connectors! • The CPU_FAN connector supports a CPU fan of maximum 1A (12 W) fan power. • Only the 4-pin CPU fan supports the ASUS Fan Xpert 2 feature. 3. The connector is for a serial (COM) port. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis. The serial port module is purchased separately. COM1 RXD DTR DSR CTS P8H61-M2/TPM/SI R2. 0 Serial port connectors (10-1 pin COM1) CPU FAN PWM CPU FAN IN CPU FAN PWR GND GND +12V Rotation P8H61-M2/TPM/SI R2. 0 Serial port (COM1) connector Chapter 1: Product introduction DCD TXD GND RTS RI PIN 1 1-23 E7361_P8H61-M2-TPM-SI R2. 0_Manua23 23 5/16/12 1:44:27 PM 4. LPT connector (26-1 pin LPT) The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT is standardized as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers. LPT GND GND GND GND GND GND GND GND SLIN# INIT# ERR# AFD SLCT PE BUSY ACK# PD7 PD6 PD5 PD4 PD3 PD2 PD1 PD0 STB# PIN 1 P8H61-M2/TPM/SI R2. 0 P8H61-M2/TPM/SI R2. 0 parallel port connector 5. This connector supports several chassis-mounted functions. F_PANEL PLED PWRBTN System panel connector (10-1 pin F_PANEL) PIN 1 P8H61-M2/TPM/SI R2. 0 +HDLED P8H61-M2/TPM/SI R2. 0 System panel connector • System power LED (2-pin PLED) • This 2-pin connector is for the system power LED. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. Hard disk drive activity LED (2-pin +HDLED) • • This 2-pin connector is for the HDD Activity LED. The HD LED lights up or flashes when data is read from or written to the HDD. ATX power button/soft-off button (2-pin PWRBTN) This 2-pin connector is for the system power button. Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. 1-24 HD_LED+ HD_LEDGround Reset RESET PLED+ PLEDPWR GND ASUS P8H61-M2/TPM/SI R2. 0 E7361_P8H61-M2-TPM-SI R2. 0_Manua24 24 5/16/12 1:44:28 PM 6. These connectors connect to Serial ATA 3. 0 Gb/s hard disk drives and optical drives via Serial ATA 3. 0 Gb/s signal cables. SATA3G_3 SATA3G_1 Serial ATA 3. 0 Gb/s connectors (7-pin SATA3G_1-4) GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXN3 RSATA_RXP3 GND SATA3G_4 GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND P8H61-M2/TPM/SI R2. 0 SATA3G_2 GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND P8H61-M2/TPM/SI R2. 0 Intel® SATA 3. 0Gb/s connectors • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. • Due to H61 Chipset limitation, AHCI Mode only works on Windows® Vista / Windows® 7. • To configure the SATA type in BIOS, click Advanced Mode > Advanced tab > SATA Configuration > SATA Mode Selection. • When using hot-plug and NCQ on Windows® Vista / Windows® 7, set the SATA Mode Selection item in the BIOS to [AHCI]. See section 2. 5. 4 SATA Configuration for details. 7. AGND NC SENSE1_RETUR SENSE2_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. Front panel audio connector (10-1 pin AAFP) GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND AGND NC NC PIN 1 AAFP PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L MIC2 MICPWR Line out_R NC Line out_L Legacy AC’97 compliant definition P8H61-M2/TPM/SI R2. 0 HD-audio-compliant pin definition P8H61-M2/TPM/SI R2. 0 Front panel audio connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • • • Increase the separation between the equipment and receiver. This device must accept any interference received including interference that may cause undesired operation. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS P8H61-M2/TPM/SI R2.0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS P8H61-M2/TPM/SI R2.0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.