User manual ASUS P8Z77-V DELUXE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASUS P8Z77-V DELUXE. We hope that this ASUS P8Z77-V DELUXE user guide will be useful to you.


ASUS P8Z77-V DELUXE : Download the complete user guide (9610 Ko)

You may also download the following manuals related to this product:

   ASUS P8Z77-V DELUXE (18693 ko)
   ASUS P8Z77-V DELUXE (9133 ko)
   ASUS P8Z77-V DELUXE (21171 ko)

Manual abstract: user guide ASUS P8Z77-V DELUXE

Detailed instructions for use are in the User's Guide.

[. . . ] Make a floppy disk containing the SATA controller driver. (5) Install the SATA controller driver during OS installation. Before you begin Please prepare: (a) Two SATA hard drives (to ensure optimal performance, it is recommended that you use two hard drives with identical model and capacity). If you do not want to create RAID with the SATA controller, you may prepare only one hard drive. (d) Driver CD for your motherboard. (1) Installing SATA hard drive(s) in your system Attach one end of the SATA signal cable to the rear of the SATA hard drive and the other end to available SATA port(s) on the motherboard (If there are more than one SATA controller on your motherboard, you may check the name of the SATA connnector to identify the SATA controlller for the connector. For example, SATA0_SII/SATA1_SII is controlled by the Sil3112 controller). [. . . ] Then connect the power connector from your power supply to the hard drive. "*" Skip this step if you do not want to create RAID array on the SATA controller SATA Hard Drive Configurations (Sil3112) -2- (2) Configuring SATA controller mode and boot sequence in BIOS Setup You have to make sure whether the SATA controller is configured correctly in system BIOS Setup and set BIOS boot sequence for the SATA hard drive(s). Step 1: Turn on your computer and press Del to enter BIOS Setup during POST (Power-On Self Test). In BIOS Setup menu, go to Integrated Peripherals and assure that Onboard H/W SATA is enabled. If you want to create RAID, set the Serial ATA Function item to RAID (RAID by default) (Figure 1). Change the Serial ATA Function item to BASE if you do not want to create RAID. CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Figure 1 The BIOS Setup menus described in this section may not show the exact settings for your motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version . -3- SATA Hard Drive Configurations (Sil3112) Ác Åé ¤¤ ¤å Step 2: Select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which you want to install Microsoft Windows 2000/XP (Figure 2). CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Hard Disk Boot Priority Figure 2 Step 3: Set First Boot Device under the Advanced BIOS Features menu to CD-ROM to boot from CD-ROM drive after system restarts (Figure 3). CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Advanced BIOS Features : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Figure 3 Step 4: Save and exit BIOS Setup. SATA Hard Drive Configurations (Sil3112) -4- (3) Configuring RAID set in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if you do not want to create RAID. Step 1: Find an available system and insert the motherboard driver CD into the CD-ROM drive. Step 2: Go to My Computer and right-click the CD-ROM drive icon and select Open (Figure 10). Figure 10 Step 3: Go to the BootDrv folder and look for an executable program named MENU. exe (Figure 11). Figure 11 SATA Hard Drive Configurations (Sil3112) -8- Step 4: Double-click MENU. exe. An MS-DOS prompt screen similar to Figure 12 below will appear. Figure 12 Step 5: Insert an empty floppy disk. If you want to create RAID array(s), press 4 to select the 4)SilRAID item. Then it will take about one minute to copy the SATA driver from the motherboard driver CD to the floppy disk. You have copied the SATA driver sucessfully. Figure 13 -9- SATA Hard Drive Configurations (Sil3112) Ác Åé ¤¤ ¤å (5) Installing SATA controller driver during OS installation Now that you have prepared a floppy disk with the SATA controller driver and configured BIOS settings, you are ready to install Windows 2000/XP onto your SATA hard drive with the driver. Step 1: Restart your system to boot from the Windows 2000/XP Setup disk and press F6 as soon as you see the "Press F6 if you need to install a 3rd party SCSI or RAID driver" message (Figure 20). After pressing F6, there will be a few moments of some files being loaded before you see the next screen. Figure 14 Step 2: When a screen similar to that below appears (Figure 15), insert the floppy disk containing the SATA driver and press S. Figure 15 SATA Hard Drive Configurations (Sil3112) - 10 - Step 3: If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 16 below will appear. If you want to install Windows XP, use the ARROW keys to select Silicon Image SiI 3x12 SATARaid Controller for Windows XP* and press ENTER. [. . . ] If you want to install Windows XP, use the ARROW keys to select Silicon Image SiI 3x12 SATARaid Controller for Windows XP* and press ENTER. Then it will begin to load the SATA driver from the floppy disk. Figure 16 If you have copied the SATA non-RAID driver, a screen similar to that below will appear. Use the ARROW keys to select Silicon Image SiI 3x12 SATALink Controller for Windows XP/Server 2003* (Figure 17) and press ENTER. Then it will begin to load the SATA driver from the floppy disk. Figure 17 If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA driver again from the motherboard driver CD. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS P8Z77-V DELUXE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS P8Z77-V DELUXE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.