User manual AUTOTECH 10.715.011K
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AUTOTECH 10.715.011K. We hope that this AUTOTECH 10.715.011K user guide will be useful to you.
 |
AUTOTECH 10.715.011K : Download the complete user guide (62 Ko) |
Manual abstract: user guide AUTOTECH 10.715.011K
Detailed instructions for use are in the User's Guide.
[. . . ] Installation Instructions
Part Number: 10. 715. 011K Description: Short shift kit for A2 vehicles
Tools Required : Screwdriver(flat) 13mm open end wrench Needle nose pliers Parts List: One modified lever One plastic link rod
Notes: This short shift kit is selectable for shift reduction. [. . . ] Using a screwdriver, unsnap the ball sockets on each end of the short plastic linkage rod, then gently pry the linkage rod off its attachments 3. remove the retaining clip that holds the long metal rod to the selector lever then pull the rod's end from the lever. Next using the 13mm open end wrench, remove the nut that holds the selector lever to the transmission and pull off the old lever. Attach the new special selector lever to the transmission using the original nut making sure to match the splines properly. [. . . ] Attach the metal rod to the selector lever in either of the two holes provided depending on which amount of shift reduction you prefer (see not above) Reattach the retaining clip 8. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AUTOTECH 10.715.011K
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AUTOTECH 10.715.011K will begin.