User manual AVG AVG RESCUE CD FOR WINDOWS V 85.2

[. . . ] This product contains Windows software licensed from Microsoft Corporation and/or MS Affiliate(s). The Microsoft Windows Preinstallation Environment software included with this software may be used for boot, diagnostic, setup, restoration, installation, configuration, test or disaster recovery purposes only. This software contains a security feature that will cause end user's system to reboot without prior notification to the end user after 24 hours of continuous use. This product uses code from C-SaCzech library, Copyright (c) 1996-2001 Jaromir Dolecek (dolecek@ics. [. . . ] If there are multiple items listed, look for the adapter you use for Internet connection (if you are connecting via LAN/WAN network, look for names like Ethernet NIC, LAN CARD, LAN Adapter, Ethernet Controller etc. If you cannot recognize your network adapter from multiple choices, repeat the steps c) to d) for all the available network cards. In the Driver files section you will see a list of files and their locations. Navigate to the mentioned locations and copy all files to a separate folder or just note down the file name and location. Where c:\ is your system drive, and \Windows is your Windows installation directory. Inf files in this directory, so you need to find the one, that contains the driver file name that you found in the previous step (in our case Rtnicxp. Inf file is to press the Windows Start button, select Run and type in: c:\windows\inf Assuming that this is your windows location and system drive. A new dialog will appear, press F3 to open the search panel and if asked, select All files and folder. There should be two fields All or part of the file name and A word or phrase in the file. You should experience some results: From the result dialog box select all files found and copy them to a separate directory (different from the one you placed the previous driver file into), or just note down the name of the file. Note: If there are no results listed, make sure you typed in the name of the driver file correctly, or try to use only part of the driver name. E) You can repeat the process for all other files that you found via the Driver file details dialog, if necessary, but usually one driver uses only one . Once you have finished searching for the appropriate files, go back to the AVG Rescue CD creator application and continue with the ISO file compilation. After successful startup of the AVG Rescue CD, AVG should be automatically started. As AVG Rescue CD is built on a specific Windows platform, a low screen resolution is used by default to avoid graphics adapters compatibility issues. If you experience difficulties using application with the default screen resolution, you may change it by navigating to the upper menu File and selecting Utilities on CD/Screen item. The Current section shows the actual screen resolution, the Available section allows you to choose from modes supported by your graphics adapter. Although you may be able to select a very high resolution as well, we strongly recommend, that you stick to regular 800x600 or 1024x768 screen resolutions. Warning: We strongly recommend that you consult your monitor user guide and check, whether your monitor is able to handle the chosen screen resolution!The main reason is, that in case of some older monitor types, selecting a very high screen resolution may cause a device malfunction (in rare cases). If you accidentally select a resolution, that is higher than your VGA adapter can handle and the display will become corrupted or unreadable, simply wait five seconds, AVG Rescue CD will automatically change the resolution back to the default value. If the screen looks according to your needs, press the OK button to finally confirm your change and close the dialog by selecting Cancel button. [. . . ] AVG Scan Disk can analyze hard disks and report (and if possible fix) errors. After AVG Scan Disk startup, choose the drive letter that is to be checked. If there are any errors listed in the final report, then you can try to fix them by ticking the Fix errors box and re-analyzing the drive again by clicking the Start scan button. Before using the Fix errors feature, we recommend to backup all important data from your drive to some portable device. [. . . ]