User manual AZAMERICA DVB-S2 S900

[. . . ] Tools 4. 1 Information 4. 2 Factory Setting 4. 3 Upgrade by USB 4. 4 Conditional Access 4. 5 USB 4. 6 Network Local Setting 4. 7 Upgrade by Network 5. Hot key 7. 1 Info 7. 2 EPG 7. 3 Find 7. 4 Numer 7. 5 TV/Radio 7. 6 Up/Down 7. 7 Left/Right 7. 8 Mute 7. 9 Pause 7. 10 OK 7. 11 Audio 7. 12 Recall 7. 13 Fav 18 18 18 19 19 20 21 21 21 22 22 22 22 22 23 23 23 23 24 24 24 24 24 24 25 25 25 26 A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in detail, which will allow you to make full use of these features. [. . . ] After pressing OK key, you can use numeric keys to edit the longitude, press EXIT key or the PR+, PR- keys to exit editing mode. If beyond this range, system will inform you "out of range" when you press yellow colour key on the RCU. After setting, press yellow colour key to save and exit, while press blue colour key to exit without saving. Since the same operation as the above Edit Satellite window, here we don't explain any more. Press blue colour key to pop up the dialogue "Are you sure to delete?". You can cancel this operation by pressing OK key at the NO button. 2. 3 Antenna Setup Part A: Fixed Suppose that you have selected Fixed Antenna in the Antenna Connection window. Satellite: All selected satellites in the satellite list are displayed in this item. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. LNB Freq, Transponder, DiSEqC1. 0, DiSEqC1. 1: The same operation as the above. 22K, 0/12V, Polarity: You can press Part B: Motor Suppose that you have selected Moter Antenna in the Antenna Connection window. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit. Press OK key at the Yes button to continue the modification, or press OK key at the No button to exit without saving. 3. 4 Timer Setting If there is no program, you can not enter into this window. Select Timer up or down, and press OK key to enter into the setting window. If Channel is selected, the Wakeup Channel is displayed in the following item. If Record is selected, the Wakeup Record is displayed in the following item. After waking up, system will power off automatically after the duration time. 3. 5 Parental Lock Before entering into the Parental Lock window, you need input the correct password. If select "On" , you can not enter into the most window before entering the password. If select "On", you can not view the locked channel set in Chanel List Edit window until you have inputted the correct password. System will inform you "Change password successfully!" while they are the same, or inform you to input the password of Confirm password once again when they are not the same. The default keys to select 3. 7 Favorite There are 32 favorites group listed in this window. [. . . ] 4. Press red color key to pop up the window for renaming the channel you selected, press numeric keys (0-9) to input the character . PS Record: Select between ON and OFF. 6. 3 HDD Information Show you the information in windows as besides. Red key: Press red key to format the disk Green key: Press green key to pop up DVR Set window, you can select DVR type in this window. 7. Press INFO key again to pop up the program guide of the current program. 7. 2 EPG Press EPG key to enter into the EPG window. [. . . ]