User manual AZAMERICA S800

[. . . ] GENERAL INFORMATION Main Features For your Safety Unpacking General Operation RCU 2 3 4 4 5 2 INSTALLATION Front Panel Rear Panel Connecting to TV using RCA support Connecting to Digital Amplifier 6 6 7 7 6 MENU INFORMATION Main Menu 1. Channel List 1. 1 TV Channel List 1. 2 Radio Channel List 1. 3 Delete All 2. Installation 2. 1 Antenna Connection 2. 2 Satellite List 2. 3 Antenna Setup 2. 4 Single Satellite Search 2. 5 Multi Satellite Search 2. 6 TP List 3. System Setup 3. 1 Language 3. 2 TV 3. 3 Local Time setting 3. 4 Timer Setting 3. 5 Parental Control 3. 6 OSD Setting 3. 7 Favorite 3. 8 Other 4. [. . . ] If there is no satellite, the red colour and blue colour keys will be invalid. 3. Name: User numeric keys to change the name of the satellite, please refer to the Edit Channel Name. 13 Longitude: You can press press EXIT key keys to switch between east longitude and west longitude. After pressing OK key, you can use numeric keys to edit the longitude, or the PR+, PR- keys to exit editing mode. If beyond this range, system will inform you "out of range" when you press yellow colour key on the RCU. West <Save> East: Press key to turn west, while press key to turn east. Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to save the current position, or press OK key at the No button to cancel the operation. Recalculation: Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". keys to switch among Disable Limit, East Limit and West Go to Reference: Press OK key to go to reference. If you select Disable Limit in the above Limit Setup item, this button will turn grey. 6. Local Longitude, Local Latitude: Press keys to switch between West and East, or press keys to switch between North and South. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit. The range of the longitude is from 0 to 180, while the range of the latitude is from 0 to 90. If the inputted value is not in this range, system will pop up a dialogue "Out of Range" when exit from this window. Satellite, Transponder: Press keys to select satellite or transponder, or press OK key to pop up the drop-down list and select in the list. 16 2. 4 Single Satellite Search 1. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. This item turns grey when Auto Scan is selected in the following Scan mode item. Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies. 2. 5 Multi Satellite Search From the Multi Satellite Search window, you can search several satellites at the one time. Satellite: All selected satellites in the satellite list window are displayed on the down part. This item turns grey when Auto Scan is selected in the following Scan mode item. Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies. [. . . ] : Press OK key at this button to move the cursor to the current time line. Detail Information: In the EPG window, press PR+, PRcurrent program. keys to select the channel and program, and press OK key to know the detail information of the 4. If 8 timers is already, system will inform "Timer is full!'. User numeric keys to enter into the character and use the colour keys to realized the corresponding operation. [. . . ]