User manual AZAMERICA S809

[. . . ] User´s Guide . English GENERAL INFORMATION Main Features For your Safety Unpacking General Operation RCU 1 2 3 3 4 1 INSTALLATION Front Panel Rear Panel Connecting to TV using RCA support Connecting to Digital Amplifier 5 5 6 6 5 MENU INFORMATION Main Menu 1. Channel List 1. 1 TV Channel List 1. 2 Radio Channel List 1. 3 Delete All 2. Installation 2. 1 Antenna Connection 2. 2 Satellite List 2. 3 Antenna Setup 2. 4 Single Satellite Search 2. 5 Multi Satellite Search 2. 6 TP List 3. System Setup 3. 1 Language 3. 2 TV 3. 3 Local Time setting 3. 4 Timer Setting 3. 5 Parental Control 3. 6 OSD Setting 3. 7 Favorite 3. 8 Other 7 7 8 8 10 10 10 11 11 12 13 14 14 15 15 16 16 16 17 17 18 18 4. [. . . ] Satellite, Transponder: Press keys to select satellite or transponder, or press OK key to pop up the drop-down list and select in the list. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. This item turns grey when Auto Scan is selected in the following Scan mode item. Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies. 2. 5 Multi Satellite Search From the Multi Satellite Search window, you can search several satellites at the one time. Satellite: All selected satellites in the satellite list window are displayed on the down part. This item turns grey when Auto Scan is selected in the following Scan mode item. Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies. Frequency, Symbol rate: Press to input keys to add or reduce by step one. The range of the frequency is 3000-13450, while the range of the symbol rate is 1000~45000. The inputted value is beyond this range, the value will return to the origin value. Since the same operation as the above Edit TP window, here we don't explain any more. 4. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK key at the Yes button to delete the selected TP, or press EXIT key to cancel the operation. 5. FTA only, Scan Channel, Network Search: Press keys to select the proper option. Press keys to select the language in keys to move the circle, while press PR+, PRcursor up or down in circle. The types of the language, pleaser refer to the configuration of the customer. key to move the focus 3. 2 TV System Press PR+, PR- key to move the cursor up or down, while press keys to change the setting and the setting will take effect immediately. GMT Offset: When select "ON" in GMT Usage item, system will get the date and time information from the screen automatically. 3. Date, Time: When select "OFF" in GMT Usage, Date and Time two items take effect, while GMT Usage turns grey. Press OK key at the Yes button to continue the modification, or press OK key at the No button to exit without saving. 3. 4 Timer Setting If there is no program, you can not enter into this window. [. . . ] : Press OK key at this button to move the cursor to the current time line. From the current day, you can switch among the future 14 days in circle. If 8 timers is already, system will inform "Timer is full!'. keys to select keys to select left or right in the keys to select up or the channel and program, and press OK key to know the detail information of the 7. 3 Find Press FIND key on to pop up the Find window. [. . . ]