User manual B&K SR10.1 REMOTE CONTROL

[. . . ] All rights reserved. Cleaning the Screen Warranty B & K Components, Ltd. Buffalo, New York 14227 1. 800. 543. 5252 In NY: 716. 656. 0026 Fax: 716. 656. 1291 E-mail: info@bkcomp. com . On the web: www. bkcomp. com Specifications 1 2 Finding the MAIN Menu The MAIN Button always takes you to the MAIN Menu. Turn On Your Entire System Power on/off your entire system with the MAIN Menu by following these steps: 1. [. . . ] When you select a device, the the remote control becomes the remote control you select WITHOUT affecting the home theater. TIP ­ Hold the remote control steady and pointed at the system until the indicator stops flashing. If the sound or the picture still are not correct, repeat steps 1 - 4. Select a New ACTIVITY Select a DEVICE Only 1. While holding the MAIN button down, touch the button next to the desired screen label. The remote control will now display the name of the selected device and all buttons will operate the device, however, the sound and the picture of your system have not been changed. 2. Point the the remote control at the system (or at the repeating INFRARED sensor if one is installed). For example if you wish to watch a DVD movie, touch the DVD button. 5 6 Controlling the Volume For your convenience, the VOLUME Up, VOLUME Down and the MUTE buttons will always control the surround sound system, regardless of what activity or device you are controlling. The Power ON and OFF buttons now operate only the selected device (to turn the entire system on/off, return to the MAIN Menu). The ten screen labeled buttons are now labeled with any commands that do not fit one of the buttons with printed labels. Operating any Device You can see the name of the device at the top of the screen. If it is not the one you want, return to the MAIN Menu and select a new device or activity. DVD OPEN CLOSE AUDIO VIDEO ANGLE SCENE TITLE SKIPSUB SKIP+ DVD OPEN CLOSE All of the printed label buttons on the remote operate just like the original remote control (with the exception of Volume Up, Volume Down and Mute which operate your surround sound system). Up to 40 screen labeled buttons are available for each device. To view the additional buttons, press the PAGE button to display additional pages. The the remote control can display up to four pages of screen labeled buttons for each activity or device!As you scroll through the pages, notice that the bottom title bar displays which page you are viewing (PAGE 1, PAGE 2, etc. ). 7 8 The thumbpad is a the remote control exclusive control for both right and left handed operators. When you are operating a device with any kind of onscreen menu, guide or display, the thumbpad offers you easy one-handed control with your thumb. your system. Discuss any non-channel favorite label with your installer, so that you understand how to use it. The top title bar will now display FAV. To SELECT or say OK, simply press your thumb straight down. You'll feel the click as the OK/SELECT/ENTER command is sent. Using FAV - Favorites The favorites menu is created uniquely for you by your custom installer. The screen labeled buttons now issue timed sequences of commands that will reset your system with one touch. Typically, the favorites menu is programmed with one touch "shortcut" buttons that issue all of the necessary commands to change the channel of your satellite dish or television. Thus, instead of entering a two or three digit number (which you must remember) and the enter command, you simply select the favorite button labeled HBO, CNN, TNT etc. [. . . ] This warranty does not cover the following items: -Batteries, or damage to the remote from faulty batteries. -Products that have been modified or incorporated into other products. -Units purchasedfrom unauthorized dealers or companies. Notes Specifications Range: 40 to 60 feet, depending upon components Weight: 8 oz. [. . . ]