User manual BAUKNECHT WTW5700XL

[. . . ] Washer with low-water washplate wash system The most striking difference in your new washer is the low-water washplate wash system. The washer automatically adjusts the water level to the load size--no water level selector is needed. As the washer dampens and moves the load, the level of the clothes will settle in the basket. This is normal, and does not indicate that more clothes should be added. [. . . ] Make sure the dispenser drawer is closed completely, then press POWER to turn on the washer. Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach. Indicator for Estimated Time Remaining will light up with a cycle time. If you do not want to begin a cycle immediately, you may choose DELAY WASH option. Always read and follow fabric care label instructions to avoid damage to your garments. Warm Some cold water will be added, so this will be cooler than what your previous washer provided. cool - brights/darks Warm water is added to assist in soil removal and to help dissolve detergents. Cold Warm water may be added to assist in soil removal and to help dissolve detergents. The delay countdown has started when the START/Pause/Unlock light stops blinking. To cancel delaying a cycle: Press START/Pause/Unlock again to begin a wash cycle immediately. IMPORTANT: When delaying a cycle, use liquid HE detergent only in the detergent dispenser tray. You may find laundry product residue leftover in your dispenser trays. If washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving. Disconnect drain from drain system and drain any remaining water into a pan or bucket. Place packing tray from original shipping materials back inside washer. If you do not have packing tray, place heavy blankets or towels into basket opening. If moving, or not using your washer for a period of time, follow these steps: 1. Turn off water supply to washer, to avoid flooding due to water pressure surge. -type antifreeze in basket and run washer on RINSE AND SPIN cycle for about 30 seconds to mix antifreeze and remaining water. To reinstall washer after non-use, vacation, winter storage, or moving: 1. Before using again, run washer through the following recommended procedure: To use washer again: 1. Run washer through BULKY ITEMS cycle to clean washer and remove antifreeze, if used. [. . . ] The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with Whirlpool's published installation instructions. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered, or cannot be easily determined. dISCLAIMER OF IMPLIED WARRANTIES IMPLIED WARRANTIES , INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE , ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the duration of implied warranties of merchantability or tness, so this limitation may not apply to you. [. . . ]