User manual BEURER IL 50

[. . . ] 2 – 7 G Infrared heat lamp Instruction for Use. Signs and symbols The following symbols appear in these instructions: Warning instruction indicating a Warning risk of injury or damage to health. Our name stands for high-quality, thoroughly tested products for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle th rapy, massage and air. Be sure to make them accessible to other users and observe the information they contain. [. . . ] €¢ Do not leave any easily flammable or meltable items close to the unit. Infrared radiant heater with adjustable timer (1 to 15 minutes) and swivelling body (0 to 50 degrees). €¢ The timer switches off automatically at the end of the set time. €¢ The swivelling body allows you to adjust the infrared radiant heater to suit your needs. Before starting Important • Before you use the unit for the first time, remove all packaging materials. If in doubt and the unit is damaged, do not use it and contact your dealer or the customer service address provided. €¢ The manufacturer is not liable for damage caused by improper or incorrect use. Operation Unpacking and set-up Warning • Remove all packaging materials before using the unit. €¢ Maintain a distance of at least 1 metre from other objects, both to protect the unit itself from overheating and to prevent the risk of fire or burning. Do not attempt to repair the unit, otherwise problem-free operation cannot be guaranteed. • For repairs , contact Customer Service or an authorised dealer. Warning • Do not bump the unit while it is operating or cooling down or you could damage the lamp. €¢ Set the desired treatment time (1 to 15 minutes) by pressing the time selector (5) several times. Unit description Overview 1 2 Preparing for treatment • Arrange yourself in front of the unit so you can relax and enjoy the treatment of the part of the body concerned. €¢ Tilt the lamp so the unit is angled directly at the part of the body being treated. €¢ The distance to the infrared radiant heater depends largely on personal heat sensitivity and the treatment concerned. €¢ Make sure the distance between the infrared radiant heater and the part of the body being treated is not less than 30 cm!Do not use the unit for more than 15 minutes at a time (risk of overheating). 3 4 5 6 Item Name 1 Swivelling body with handles 2 Disc 3 On/Off switch 4 Remaining time display 5 Time selector 6  Foot with integrated cable channel for coiling the power cable. Belt buckles, necklaces, bras, jewellery or piercings, from the treatment area before switching on the device as they can become very hot. However, even when the unit is used correctly, the skin of some people can have an oversensitive or allergic reaction to the heat treatment (e. Replacing the fuse (UK plug only) If the fuse needs replacing, please observe the following: • Remove the mains plug •  ift out the fuse holder from the inside of the mains L plug using a flat screwdriver •  ull out the fuse from the fuse holder and replace it P with a new fuse type: 3A (breaking capacity 6 kA at 240 V) in accordance with BS-1362 / SS167. [. . . ] The customer or the user of the IL50 should assure that it is used in such an environment. Immunity test Electrostatic discharge (ESD) IEC 61000-4-2 (EN 61000-4-2) Electrical fast transient/ burst IEC 61000-4-4 (EN 61000-4-4) Surge IEC 61000-4-5 (EN 61000-4-5) Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11 (IEC 61000-4-11) IEC 60601 test level ±6 kV contact ±8 kV air Compliance level ±6 kV contact ±8 kV air Electromagnetic environment --guidance Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30 %. Mains power quality should be that of a typical commercial or hospital environment. [. . . ]