User manual BEURER WL 70

[. . . ] IMPORTANT • Protect the device from impacts, humidity, dirt, marked temperature fluctuations and direct sunlight. Getting to know your device The Beurer WL 70 wake-up light wakes you from sleep in a gentle and natural manner. The LED light gradually becomes brighter like a rising sun, allowing you to slowly become accustomed to the light conditions and your body to gently prepare itself for waking up. You can also set an alarm tone that is sounded following the simulated sunrise and provides an acoustic aid to help you wake up. [. . . ] Use the / buttons to switch the sunrise function on (O N ) or off (OF F). Note You can also choose to be woken up by a sunrise function in addition to the alarm tone. In the process, the LED light slowly turns brighter prior to the actual alarm time that is set. € If the sunrise function is switched on, the duration of the sunrise flashes (1 0 M I N ). Use the / buttons to select the duration of the sunrise prior to the alarm time (1, 2, 5, 10, 20 or 30 minutes). Use the / buttons to select the desired brightness of the sunrise at the alarm time (5, 10, 15 or 20). If you are woken up by light relatively quickly, then we recommend reducing the brightness. Use the / buttons to select the desired snooze duration (1,  2, 5, 10, 20 or 30 minutes). 5 Switching the button tone on/off • When the device is switched on, press the Menu/Set button. € Use the / buttons to switch the button tone on (O N) or off (O F F). 1 Setting the alarm The device features three alarm memory spaces that can be configured individually. When the device is switched on, keep pressing the ALARM button until the desired alarm memory space appears in the display (A 1 , A 2 or A 3). Use the / buttons to set the hour and confirm using the Menu/Set button. Use the / buttons to set the minute and confirm using the Menu/Set button. 3 Setting the display brightness • When the device is switched on, press the Menu/Set button. This is because the display is automatically illuminated at the highest setting for 10 seconds each time a button is pressed (including the snooze function). For each alarm that has been set, you can use the D A Y function to specify the days of the week on which the alarm should sound. When the device is switched on, keep pressing the ALARM button until the desired alarm memory space appears in the display (A 1 , A 2 or A 3 ) . Use the / buttons to activate (o n ) or deactivate (o f f ) the alarm for Monday. Make the settings for the other days of the week in the same way as for 12 7. 4 Setting the snooze duration • When the device is switched on, press the Menu/Set button. When the device is switched on, keep pressing the ALARM button until the desired alarm memory space appears in the display (A1, A2 or A 3 ). [. . . ] The light turns on and 2 0 l i g h t appears in the display; immediately afterwards, use the +/- buttons on the side to set the desired brightness of the light (can be selected between 1-20). Use the +/- buttons on the side to select the desired duration of the sunset (2, 5, 10, 15, 20, 30, 45 or 60 minutes), then wait for 5 seconds. The sunset function is then activated automatically and a small icon appears in the display. The light will now go out automatically once the configured duration of the sunset has elapsed. [. . . ]