User manual BEURER WL 80

[. . . ] IMPORTANT • Protect the device from impacts, humidity, dirt, marked temperature fluctuations and direct sunlight. Getting to know your device The Beurer WL 80 wake-up light wakes you from sleep in a gentle and natural manner. The LED light gradually becomes brighter like a rising sun, allowing you to slowly become accustomed to the light conditions and your body to gently prepare itself for waking up. You can also set an alarm tone that is sounded following the simulated sunrise and provides an acoustic aid to help you wake up. [. . . ] Use the / buttons to switch the sunrise function on (O N ) or off (OF F). Note You can also choose to be woken up by a sunrise function in addition to the alarm tone. In the process, the LED light slowly turns brighter prior to the actual alarm time that is set. € If the sunrise function is switched on, the duration of the sunrise flashes (1 0 M I N ). Use the / buttons to select the duration of the sunrise prior to the alarm time (1, 2, 5, 10, 20 or 30 minutes). Use the / buttons to select the desired brightness of the sunrise at the alarm time (5, 10, 15 or 20). If you are woken up by light relatively quickly, then we recommend reducing the brightness. 3 Setting the display brightness • When the device is switched on, press the Menu/Set button. This is because the display is automatically illuminated at the highest setting for 10 seconds each time a button is pressed (including the snooze function). 4 Setting the snooze duration • When the device is switched on, press the Menu/Set button. Use the / buttons to select the desired snooze duration (1,  2, 5, 10, 20 or 30 minutes). 5 Switching the button tone on/off • When the device is switched on, press the Menu/Set button. € Use the / buttons to switch the button tone on (O N) or off (O F F). 1 Setting the alarm The device features three alarm memory spaces that can be configured individually. When the device is switched on, keep pressing the ALARM button until the desired alarm memory space appears in the display (A 1 , A 2 or A 3). Use the / buttons to set the hour and confirm using the Menu/Set button. Use the / buttons to set the minute and confirm using the Menu/Set button. 3 Switching off the alarm when the alarm tone sounds When the alarm sounds, press any button apart from Snooze. The alarm is now switched off and will only sound again at the set alarm time. MP3 player, smartphone or CD player) to the wake-up light via the AUX input. Insert the other end of the AUX cable into the AUX input on the rear of the device. For each alarm that has been set, you can use the DA Y function to specify the days of the week on which the alarm should sound. [. . . ] € Never immerse the device or mains part plug in water or other liquids. € Protect the device from impacts, humidity, dust, chemicals, marked temperature fluctuations and nearby sources of heat (ovens, heaters). 9999 files, can only be read in root directory, subdirectories are not supported. Disposal For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. [. . . ]