User manual BIKE NASHBAR NASHBAR PHOTON SPORT TWIN LIGHTING SYSTEM
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BIKE NASHBAR NASHBAR PHOTON SPORT TWIN LIGHTING SYSTEM. We hope that this BIKE NASHBAR NASHBAR PHOTON SPORT TWIN LIGHTING SYSTEM user guide will be useful to you.
Manual abstract: user guide BIKE NASHBAR NASHBAR PHOTON SPORT TWIN LIGHTING SYSTEM
Detailed instructions for use are in the User's Guide.
[. . . ] Photon High Output
Twin Headlight System
Owner's Manual
Thank you for purchasing a Photon H. O. This light system is constructed of the highest quality materials, such as cold-forged aluminum housings, heavy duty cords with strong positive-click connections, and halogen bulbs with dichoric glass reflectors. [. . . ] Once the headlamp is attached, check to ensure the mount is secure enough that it will not move on the bar during trail and road vibration, or over large bumps.
For technical support, call 1-800-888-2710, M-F 9am-6pm EST
Assembled in USA
Bike Nashbar,
6103 Rt 446, Canfield, OH. Connect the battery cord to the light cord, and snap the cords firmly together. Excess cord should be wrapped around the frame or tucked into the battery pack to prevent entanglements. To operate: The switch at the back of the headlamp housing controls each lamp. The headlamps can be operated independently of one another to conserve battery power and extend battery run time.
Bulb Replacement Read Carefully!
Take care when replacing the bulb to avoid damaging the bulb connection.
Ceramic Socket Top Tube
Lens Cap Down Tube
Bulb
Assembly
ONLY ONE LAMP SHOWN FOR CLARITY
Fig. Loosen the bolts which secure the headlamps to the base, rotate each headlamp until aimed properly, and then securely retighten the assembly bolts. To remove the headlight assembly from the handlebar mount, push the tab at the front of the bracket upward, and slide the assembly backward until it is free of the handlebar mount.
!It may be necessary to press down gently on the bulb lens while unthreading the cap. To install the bulb, first insert the two prongs of the retainer clip into the larger holes on the ceramic socket. Next, insert the bulb lead wires into the smaller holes in the socket. [. . . ] battery charger contains a trickle charge feature which allows the battery to be left on recharge indefinitely without harm. Once the charger switches to trickle mode, it must be unplugged from the wall outlet before a new charge cycle can begin. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BIKE NASHBAR NASHBAR PHOTON SPORT TWIN LIGHTING SYSTEM
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BIKE NASHBAR NASHBAR PHOTON SPORT TWIN LIGHTING SYSTEM will begin.