User manual BOSCH ART 30

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH ART 30. We hope that this BOSCH ART 30 user guide will be useful to you.


BOSCH ART 30 : Download the complete user guide (2479 Ko)

Manual abstract: user guide BOSCH ART 30

Detailed instructions for use are in the User's Guide.

[. . . ] S Take care against injury from the blade fitted for cutting the nylon line length. After feeding line always return the trimmer to its normal operating position before switching on. S Switch off and remove the plug from the socket: – whenever you leave the machine unattended for any period – before replacing the spool – if the cable is entangled – before cleaning or working on the line trimmer. Switch off and remove plug from mains before adjusting, cleaning or if the cable is entangled and before leaving the trimmer unattended for any period. [. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a 13 A socket elsewhere. Mounting the Wheels (ART 30/3000 COMBITRIM only) B1 Fit the wheels 11 onto the shaft 6. Note: The position of the wheels can be adjusted by loosening the wingnut 18 and moving to the desired position. B3 The wheels can be moved up and down the shaft 6 depending on the height of cut required. Adjustment C Using Adjustable Handle The adjustable handle 4 can be set in various positions: – To change the position undo the handle wing nut 3 and move the adjustable handle 4. — Tighten the handle wing nut 3 securely to fix the adjustable handle 4 in the adjusted position. d Adjusting Product length – Loosen the adjustment collar 5 90°. — Pull the shaft out to increase the height, or push the shaft in to decrease the height. E Adjusting cutting head angle: To change the angle depress the foot pedal 12 and move the shaft 6 to the desired position. Assembly Do not connect the machine to the mains socket before it is completely assembled. A Mounting the Cutting Guard Place the cutting guard 10 on the trimmer head 7. — Turn the shaft 6 90° to position the trimmer head 7 for trimming/edging as shown. English - 3 Cutting and Edging Remove stones, loose pieces of wood and other objects from the cutting area. The cutting line continues to rotate for a few seconds after the trimmer is switched off. Allow the motor/cutting line to stop rotating before switching “on” again. I Cutting Grass Move the trimmer left and right, keeping it well away from the body. Remove the wheels when cutting long grass (ART 30/3000 COMBITRIM only). When the line breaks off completely, feed twice to regain the full cutting circle. M If the line is exceeding the maximum cutting circle it will be cut by the blade 24 integrated in the cutting guard 10. Note: To ensure long and reliable service, carry out the following maintenance regularly. Regularly check for obvious defects such as loose fixings, and worn or damaged components. [. . . ] DO NOT wrap/loop the supply/extension cable around the hook and the guard together - this will cause the cable to be in contact with the guard blade which can damage the cable. Fault Finding The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact your service agent. Warning: Switch off and remove plug from mains before investigating fault. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH ART 30




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH ART 30 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.