User manual BOSCH PSR1440

[. . . ] english General Power Tool Safety Warnings Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. ς Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. [. . . ] ς Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Book Page 9 Monday, October 20, 2014 1:49 PM English | 9  Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. In accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. ς Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. ς Switch off the power tool immediately when the tool insert jams. The tool insert jams when: — the power tool is subject to overload or — it becomes wedged in the workpiece. High reaction torque can briefly occur while driving in and loosening screws. The correct interpretation of the symbols will help you to use the machine in a better and safer manner. Symbol Meaning PSR 14, 4 LI-2/PSR 1440 LI-2/ PSR 18 LI-2/PSR 1800 LI-2/ PSR 1810 LI-2/PSR 1820 LI-2: Cordless Drill Driver Grey-marked area: Handle (insulated gripping surface) Article number LwA LpA K ah T1 T2 Read all safety warnings and all instructions Before any work on the machine itself, remove the battery Always wear ear protection. Battery, application tools and other accessories shown or described are not part of the standard delivery scope. A complete overview of accessories can be found in our accessories program. Henk Becker Executive Vice President Engineering Helmut Heinzelmann Head of Product Certification PT/ETM9 Intended Use The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic. The light of this power tool is intended to illuminate the power tool’s direct area of working operation and is not suitable for household room illumination. 2014 Noise/Vibration Information The measured values of the machine are listed in the table on page 72. vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745. The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. [. . . ] Declaration of Conformity We declare under our sole responsibility that the product described under “Technical Data” is in conformity with all relevant provisions of the directives 2009/125/EC (Regulation 1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC including their amendments and complies with the following standards: EN 60745-1, EN 60745-2-1, EN 60745-2-2. Technical file (2006/42/EC) at: Robert Bosch GmbH, PT/ETM9, 70764 Leinfelden-Echterdingen, GERMANY Mounting and Operation Action Removing the battery Inserting the battery Mounting application tools Reversing the rotational direction Setting the torque Selecting the drilling position Gear selection, mechanical Switching On and Off Checking the battery charge condition Selecting Accessories Figure 1 2 3 4 5 6 7 8 9 – Page 73 73 73 74 74 75 75 75 76 77 Bosch Power Tools 1 609 92A 11V | (20. Book Page 12 Monday, October 20, 2014 1:49 PM 12 | English Maintenance and Cleaning  For safe and proper working, always keep the machine and ventilation slots clean. After-sales Service and Application Service In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. [. . . ]