User manual BOSCH PWS1300-125

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH PWS1300-125. We hope that this BOSCH PWS1300-125 user guide will be useful to you.


BOSCH PWS1300-125 : Download the complete user guide (11159 Ko)

Manual abstract: user guide BOSCH PWS1300-125

Detailed instructions for use are in the User's Guide.

[. . . ] ς When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. ς If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. [. . . ] Typically the A-weighted noise levels of the product are Sound pressure level Sound power level Uncertainty K Wear hearing protection!5 The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. 2014 Assembly Mounting the Protective Devices  Before any work on the machine itself, pull the mains plug. Note: After breakage of the grinding disc during operation or damage to the holding fixtures on the protection guard/power tool, the machine must promptly be sent to an after-sales service agent for maintenance. For addresses, see section “After-sales Service and Application Service”. Declaration of Conformity We declare under our sole responsibility that the product described under “Technical Data” is in conformity with all relevant provisions of the directives 2011/65/EU, 2014/30/EU, 2006/42/EC including their amendments and complies with the following standards: EN 60745-1, EN 60745-2-3. Book Page 21 Monday, December 8, 2014 3:04 PM English | 21 Protection Guard for Grinding Place the protection guard 7 onto the spindle collar of the machine until the encoding keys of the protection guard agree with the spindle collar. Press the protection guard 7 onto the spindle collar until the shoulder of the protection guard is seated against the flange of the machine, and turn the protection guard until it can clearly be heard to engage. Adjust the position of the protection guard 7 to the requirements of the work process. For this, press the release lever 1 upward and turn the protection guard 7 to the required position. ς Always adjust the protection guard 7 in such a manner that all 3 red cams of release lever 1 engage into the corresponding notches of the protection guard 7. ς Adjust the protection guard 7 in such a manner that sparking is prevented in the direction of the operator. ς The protection guard 7 may be turned only upon actuation of the release lever 1!Otherwise the power tool may not continue to be used under any circumstances and must be taken to an after-sales service agent. Note: The encoding keys on the protection guard 7 ensure that only a protection guard that fits the machine type can be mounted. Protection Guard for Cutting  For cutting with bonded abrasives, always use the protection guard for cutting 12. [. . . ] Only for EC countries: According to the European Directive 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Book Page 55 Monday, December 8, 2014 3:04 PM Português | 55 Para poupar energia só deverá ligar a ferramenta eléctrica quando ela for utilizada. Undgå at bære el-værktøjet med fingeren på afbryderen og sørg for, at el-værktøjet ikke er tændt, når det sluttes til nettet, da dette øger risikoen for personskader. Slibeskiver for afsplintninger og revner, slibebagskiver for revner, slid eller stærkt slid, trådbørster for løse eller brækkede tråde. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH PWS1300-125




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH PWS1300-125 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.