User manual BURG WATCHER TSE CONTROL

[. . . ] With the TSE Control unit, you have the possibility of controlling electrical equipment using the TSE E-keys. to do so , the appliance to be switched on/off must be connected to the TSE Control unit. [. . . ] The following connections are available: · The power supply unit is connected (if required) using the +/- terminals. There is a potentialfree break contact between COM and NC and a potential-free make contact between COM and NO. Please read the operating and installation instructions for your device carefully before switching on. iMPORTANT: All guarantee rights shall be void in the event of incorrect installation. Burg-Wächter KG reserves the right to carry out changes to the product, technical data and the operating instructions without prior notification. Please read the operating instructions carefully before using this device. Installation should only be carried out with appropriate qualified knowledge. The TSE Control unit is not designed for outdoor installation and, consequently, should not be subjected to any direct weather influences. For this reason, we recommend installation in a secure area if using for security-related appliances. IMPORTANT: The maximum radio range of the TSE Control unit in connection with the E-key is max. [. . . ] After this, lay the cable and screw the connections tight onto the provided terminals. Finally, establish power supply and clip the cover onto the base plate. [. . . ]