User manual CABASSE PHI

[. . . ] maintenance - Users must never attempt to maintain the Device on their own, except for those maintenance operations described in this manual. Any task beyond regular user maintenance must be performed by qualified service operators. Instructions - Carefully read through all the safety and operating instructions before switching on any device for the first time. Keep these instructions in mind - They will be constantly referred to through this manual. [. . . ] Power - The device shall only be connected to a source of power compliant to the one described in this manual or on relevant printed labels on the product. If you are not sure of the type of power available, please contact your reseller or the With the PHI SYSTEM, Cabasse proposes a Hi Fi / audio video system based on the Spatially Coherent Source (SCS) principles coming from our high end ARTIS range of speakers. With PHI satellite speakers combined with a Santorin 21 active subwoofer you will get a very high quality system, either in a 2. PHI speakers have all the same technical features; they can be used on any channel. Front left and right speakers should be directed towards the listening area and placed on either side of the screen with at least a distance of 7 ft and 16 ft (2 and 5 m) between the 2 speakers. The centre satellite should be placed as close as possible to the screen: on the top, below, or directly on your television set. place the satellite at the vertical of the screen for a perfect cohesion and precision between dialogues and picture. Surround speakers should be placed against the side walls, at listening height or higher if possible and slightly behind the listening area. To get the best result, it is always necessary to carry out tests according to the acoustics of the room. Repack everything in the original packing and contact your authorized Cabasse dealer immediately. To avoid electric shock or fire hazards, do not expose speakers to rain or moisture. To avoid danger of suffocation keeps the plastic bags that wrap these speakers out of the reach of children. Before making any connection turns off your amplifier and unplugs it from the outlet. Use loudspeaker cables to connect the speaker outputs of your integrated stereo amplifier to the HIGH LEVEL INPUTS of the Santorin 21, then connect the HIGH LEVEL To place your speaker on its base horizontally (centre chanto fix your speaker horizontally on to the wall (centre way), Ensure that each speaker is connected according to its position in the room. check that all the speakers are well in phase (+/red in +/red and -/black in /black). Once this checking made you can connect your amplifier and the subwoofer to the sector. Thanks to 2 brackets included, these brackets are to be fixed on the wall with 4 screws 4, To fix your speaker vertically on the wall (main or surround channels), thanks to 2 brackets included, these brackets are to be fixed on the wall with 4 screws. Sary first to unscrew the 2 female brackets located on the back of the speakers, turn them 90° around, and screw up them back. Take care of positioning the sector switch 115V/230V A on the right position according to your country. The ON/OFF switch B (located on the back) of the subwoofer has 3 positions: ON AUTO Automatic, the system is put automatically on ON or OFF according to the presence of signal coming from the AV amplifier. For an optimum adjustment of the volume, we advise you to carry out it starting from a stereo source (CD). Then use the SET UP PROCESS of your AV amplifier to adjust the level of channel SUBWOOFER/LFE. [. . . ] Do not use any sprays near the system or allow liquids to spill into any openings. Also, do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. The grill assemblies on the speakers may be carefully vacuumed, if necessary. Please note that the drivers are located directly behind the grille cloth, and are easily damaged if reasonable care is not taken. [. . . ]