User manual CANON IMAGEFORMULA DR-M1060 CAPTUREPERFECT SPEC SHEET (HIGH RES PRINT)

[. . . ] 3 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About This Manual ###HOME > Chapter 1 Introduction > About This Manual### Manuals for the Scanner Documentation for this scanner consists of the following manuals. [. . . ] A multiple-page scan cannot be saved when it reaches the file size of 2 GB. Change the save settings if an error message is displayed. 46 3 To check the scanned image, click the [Finish] button. If scanning continuously, set the next document, and click the [Scan more pages] button to start the document scan. If [Enable additional scan] is disabled in the scanning shortcut settings, the [Scan more pages] button will not be displayed. To edit scan images, see "Operations for the scanned image edit window" on p. 49. If [Edit after scanning] is disabled in the scanning shortcut settings, the edit window will not be displayed. Click the [ ] button to edit the output settings. -> "Setting the output" Click the [Cancel] button to discard the scanned image and return to the main window. When the output has finished, a popup window will be displayed. This completes the shortcut scans. s 47 Scanning with Start Button ###HOME > Chapter 6 Scanning with CaptureOnTouch > Scanning with Start Button### If you click [Open storage folder], the folder in which the saved scanned images were saved opens. Depending on the output settings, the [Open storage folder] button may not be displayed. "Scanning shortcuts" are allocated to the scanner start button in advance. You can set frequently-used scans to the scanning shortcuts, and then allocate them to the start button. If you place the document and press the Start button, CaptureOnTouch starts and scanning starts. If the [Do not display the main screen when the scan is started with the scanner button] checkbox is enabled in the global settings, the main CaptureOnTouch window will not be displayed when a scan is started from the start button. Only dialog boxes, error messages, and completion popup windows are displayed during scanning. If the [Do not display the main screen when the scan is started with the scanner button] checkbox is enabled, [Enable additional scan] and [edit after scanning] will be disabled when scanning is started from the start button. 48 Operations for the scanned image edit window ###HOME > Chapter 6 Scanning with CaptureOnTouch > Operations for the scanned image edit window### When scanning has finished, a preview window of the scanned image will be displayed. To specify the document size, color mode, and other settings, set the desired scan condition by editing the scan mode panel. [Color mode] Select the color mode for scanning from below. Detect automatically 24-bit Color 24-bit color (photograph) Grayscale Grayscale (photograph) Automatically determines the color mode based on the document content and scans accordingly. Scans the document in black and white (binary). Creating new [Select document] panels Click the [New document] button, and a [New document] panel will be added. The selected type of the panel is created. Black and White [Page Size] Select the paper size of the document to be scanned. If you specify [Match original size], the page size of the scanned document is detected and the images are saved at the detected size. Edit [Select document] panel The [Select document edit screen] opens when you click the [ ] button in the [Select document] panel. Click the [Select document] tab in the shortcuts editing window. [Dots per inch] Select the resolution. Select [Detect automatically] and the software will automatically scan the document at the optimum resolution. [Scanning Side] Select the scanning side of the document. If you select [Skip blank page], scanned images of blank pages are not saved. [Automatically straightens skewed images] If a document is not straight when fed, the scanner detects that the document is not straight from the scanned image and straightens the skewed image. Straightens with angle of fed documents, Straightens with angle contents of fed documents Scan settings Makes the scan settings. 52 [Rotate image to match orientation of text] Check [Enable] on to rotate the image in the same direction with the characters. Icon You can change the document scan icon displayed in the select document panel and scanning shortcut panel. Enable [Change icon] to enable the [Settings] button and select the file. The file formats that can be selected as icon files are described below. [Use advanced settings dialog box] Document scan settings include basic items that are configured in [Scan settings], and the settings that are configured in the advanced settings dialog box. The settings in the advanced settings dialog box are applied for settings other than the basic items. [. . . ] 82 When you want to use multistream settings for scanning . . . . . . . . . . . . . 83 When you want to save a scanner driver setting . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Scan Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 115 Chapter 9 Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]