User manual CHERRY POWER WHEELMOUSE,M-2000

[. . . ] Improper usage, handling, storage and external influences could lead to disturbances and defects during use. We do not grant or warrant any alterations to our product by the user in any capacity and do not accept any liability for unauthorized modifications. All repairs must be made by Cherry or an officially appointed organisation or persons. To avoid danger of explosion, the optional lithium battery may only be exchanged by an expert. [. . . ] To assign a function to a button The primary button (button 1) cannot be individually assigned a function. 1 Click on the arrow next to the list from which you wish to select a function for a button. To set the double-click speed 1 Position the mouse pointer on the slider in the group Double-click speed. 2 Press the left mouse button and pull the slider to the desired position. To configure the mouse for a left-hander 1 In the groupe Button combination, activate the button Left-hand mode. The new configuration is saved. 3. 2 Pointers (tab) In the tab Pointers, you can change the display of the mouse pointer. This enables you to assign an individual appearance to the different functions of the mouse pointer. To change the display of the pointer 1 Mark the function of the mouse pointer that you wish to change in the list. 3 Choose the mouse pointer that you wish to use for the selected function. The chosen mouse pointer appears in the list under the selected function. To set the locating of the pointer 1 In the group Locating, activate the control box On pressing CTRL, show pointer position. The new configuration is saved. 3. 3 Motion (tab) In the tab Motion you can make the following settings: · You can set the speed at which the pointer travels across the screen. · You can determine that the cursor automatically jumps to the standard button in each new dialog box. To set the pointer speed 1 Position the mouse pointer on the slider in the group Pointer speed. 2 Press the left mouse button and pull the slider to the desired position. To direct the pointer to the standard button 1 In the group Direct to button, select the control box Move cursor automatically to standard button. - OR - 3. 4 Settings (tab) In the tab Settings you can make the following settings: · You can compile an individual NetJump menu. In this menu, symbols are grouped that assist you in the operation of an Internet browser. [. . . ] The symbol of the selected command is inserted at the chosen position. 3 Repeat steps 1-2 for each command that you wish to add to the LuckyJump menu. To perform a LuckyJump command Precondition: In order to be able to perform a LuckyJump command, the function LuckyJump must be assigned to a mouse button in the tab Buttons. 1 Press the mouse button to which you have assigned the LuckyJump menu. To change the roll direction of the wheel 1 In the group Wheel, activate the control box Reverse roll direction. [. . . ]