User manual CHICCO COLORS COT MOBILE

[. . . ] To switch on the toy after fitting the batteries in the battery compartment (see the "FITTING AND/OR REMOVING REPLACEABLE BATTERIES" section), move the switch located on the left of the panel, selecting the desired volume. The toy can be used as a musical cot mobile (1), or as a musical panel (2), depending on your choice and the child's age. (1) Colors Cot Mobile The Musical Cot Mobile of Colours accompanies the baby from birth, offering three different modes: Relax, Play and Night Light. [. . . ] When the sound stops, the selection of classical music associated to the function starts automatically. STAND BY: The music stops after approximately 15 minutes, and the musical cot mobile goes into the stand-by mode. To start the musical cot mobile again, press the red or blue button, according to the desired mode. Night Light Function Selecting the yellow button activates a nightlight that reassures baby to sleep. When the child starts to stand on its knees (after 6 months), it is necessary to remove the shaft and arms of the cot mobile (see the "ASSEMBLY INSTRUCTIONS" section) to avoid injuries due to entanglement. The musical panel can remain attached to the cot side and be used as an electronic musical box. The child can press the large buttons and activate its favourite sounds and melodies. For instructions on how to switch on and use the musical panel, please refer to musical cot mobile section. This product is designed to be fitted to cots with rigid sides, and should not be used on cots with mesh sides. The musical cot mobile must be fitted to the cot only by using the components contained in the package. The toy must only be assembled by an adult, who should follow the instructions indicated below: (1) Electronic Musical Cot Mobile a) To assemble the musical base, please refer to diagram 1, checking that the components have been assembled and tightened correctly. B) To assemble the aerial part (diagram 2), insert the bell of the supporting arm and fix the two screws, ensuring that they are tightened correctly. C) Position the hanging toys into the appropriate openings, matching the colour of the string with the colour of the hanging toy. Position the bells and fasten them with the Velcro straps around the bulbs, taking care to use bells and hanging characters of the same colour (diagram 3bis). assemble the arm to the base , sliding the lid of the upper part of the musical base , freeing the housing of the arm. Insert the arm to the end, taking care that the lid is correctly and safely positioned into its housing (diagram 3). To replace batteries: Loosen the screw on the battery compartment with a screwdriver; remove the cover and spent batteries. Fit new batteries, ensuring that they have been fitted in the correct polarity (as shown on the product). [. . . ] If the disused appliance is collected correctly as separate waste, it can be recycled, treated and disposed of ecologically; this avoids a negative impact on both the environment and health, and contributes towards the recycling of the product's materials. For further information regarding the waste disposal services available, contact your local waste disposal agency or the shop where you bought the appliance. Den skall tas till en uppsamlingsplast för elektriska och elektroniska apparater eller lämnas tillbaka till återförsäljaren när man köper en liknande produkt. [. . . ]