User manual CHICCO NEPTUNE

[. . . ] Make sure that all folding or rotating car seats are always firmly fastened in place, otherwise they could be dangerous. € Pay close attention on how to fit the child seat into the vehicle, to prevent a loose seat or car door from interfering with it. € Never fit the child car seat to a seat that is only equipped with an abdominal/lap safety belt with 2-points. € No child car seat can guarantee the total safety of your child in the event of an accident, but the use of this product reduces the risk of serious injuries or death. [. . . ] These instructions and diagrams are for the installation of the child car seat on the right back seat. To fit the child car seat in other positions, carry out these operations in the same order. Place the child car seat onto the chosen forward facing car seat (diag. Thread the 3-point car safety belt through slot P on the back of the child car seat (diag. 9A and 9B), and pull it out of the slot on the other side of the backrest (diag. Click the car safety belt into the buckle so that both the abdominal and the diagonal straps pass under the armrest (diag. Pull the car safety belt firmly, ensuring that the child car seat adheres correctly to the car seat (diag. 11), if necessary, carry out this operation exercising some pressure on the child car seat with your knee. Check that the child car seat is fitted firmly in place and adheres correctly to the vehicle seat; check that the seat belt is tight. If this is not the case, repeat the fitting procedure from the beginning (diag. Always check that the seat belt is positioned correctly and no parts are twisted. NEVER fit the car safety belt in any way other than that indicated in these instructions. When the child car seat is fitted correctly, follow the instructions below to seat the child: 6. Press the restraint harnesses adjustment button H and, at the same time grasp the lower part of the child seat straps and pull in your direction as far as possible (diag. Unfasten the child car seat restraint harness, pressing PRODUCT FEATURES • This child car seat is approved for “Group 1, 2 and 3”, for the transport of children from 9 up to 36 Kg of weight (from 9 months to approximately 12 years of age), and conforms to European Standard ECE R 44/04. € This approval is “Universal”, which means that the child car seat can be used on all types of cars. €Universal” means that it is compatible with most, but not all car seats. It is suitable for use in vehicles and will fit most, but not all car seats. A correct fit is likely if the vehicle manufacturer has declared that thevehicle is capable of accepting a “Universal” child restraintfor this age group. This child restraint has been classified as “Universal” under more stringent conditions than those that were applied to earlier designs not displaying this notice. Only suitable if the vehicle is fitted with a 3-point static or 3-point retractor safety belts approved to UN/ECE Regulation No. Make sure your child is seated comfortably on the child car seat, adjust the harness straps around the childs body without pulling them too tight, join the two harness straps (diag. [. . . ] € Harnesses: Check that the fabric weft is not frayed or the harness strap worn out in the parts corresponding to the adjustment strap, crotch, shoulders and harness adjustment plate. € Plastic parts: Check that the plastic parts are not worn out, damaged or faded. € De goedkeuring is van het “Universele” type, dus kan de autostoel in elke model auto worden gebruikt. € Om stolen placeras på framsätet med en airbag aktiverad framför, rekommenderar vi att ni för större säkerhet skjuter bakåt stolen så långt det går med tanke på andra passagerare i baksätet. [. . . ]