User manual CHICCO OASYS

[. . . ] Befolgen sie bitte aufmerksam diese anleitung, um nicht die sicherheit ihres kindes zu beeinträchtigen Important: please read these instructions carefully before use and keep them for future reference. TO BE READ IMMEDIATELY •  his child car seat is “Group 2/3” certified, T to carry children from 15 to 36 Kg of weight (from 3 to approximately 12 years of age), and conforms to European Standard ECE R 44/04. €  ach country imposes different road safety E laws and regulations when transporting children in vehicles. This is why it is highly recommended to contact your local authorities to receive further information. [. . . ] €  he child car seat can be fitted into the front T passenger seat or any other back seats, al- ways in a forward facing direction. Never use this child car seat on vehicle seats which are facing sideways or rearwards (diag. According to car accident statistics, the rear seats of a vehicle are generally safer than the front seat: it is therefore recommended to fit the child car seat into the rear seats of the car. In particular, the central rear seat is the safest, when fitted with a 3-point safety strap: in this case it is recommended to fit the child car seat onto the central rear seat of the vehicle. If the child car seat is fitted in the front seat of the car, in order to ensure maximum safety, it is recommended to push the seat back as much as possible, bearing in mind the comfort of the passenger sitting in the seat directly behind it and adjusting the backrest to the most vertical position. If the vehicle is fitted with an adjuster to regulate the height of the safety belt, position it as low as possible. Check that the safety belt adjuster is behind (or at the most aligned) with the backrest of the vehicle seat (Diag. It is not recommended to fit the child car seat into a front seat equipped with airbag. If you wish to fit the child car seat in any seat protected by airbag, always refer to the vehicle instructions manual. INSTRUCTIONS FOR USE Contents Fitting the child car seat inside the vehicle using safety belts and placing the child inside Installing the child seat inside the vehicle without the child inside How to remove the child from the child car seat Removal of the child car seat from the vehicle Installing and removing the cup holder Adjusting the height of the back rest Adjusting the width of the back rest Adjusting the inclination of the child car seat backrest/seat Removable backrest/seat covers Cleaning and maintenance of the seat covers 32 Parts A. Side wings Fitting the child car seat inside the vehicle using safety belts and placing the child inside WARNING!These instructions and diagrams are for the installation of the child car seat on the right back seat. To fit the child car seat in other positions, carry out these operations in the same order.  lace the child car seat onto the vehicle seat P with the backrest up against the vehicle seat backrest (Diag. Check that the vehicle headrest does not interfere with the child seat headrest: it must not push it forwards (Diag. If this happens, remove the headrest from the vehicle seat where you intend to install the child car seat. Remember to replace the vehicle headrest when the child car seat is removed and a passenger uses the seat. The rear side of the child car seat must be resting against the vehicle seat.  lace your child inside the car seat with his P back correctly placed against the backrest.  P e o i WA tig WA no WA bel (Di jus “AD RE WA jus at WA any str WA int no Ins wit Wh chi hic in ma sen bra cle in- ms on rry eat eat est est: his hiild cle ved 5.  hread the diagonal car seat belt through T the diagonal belt guide (B). Check that the belt guide (l) open/close button is firmly closed; you must be able to see the white reference line (Diag. [. . . ] Seat Start by covering the seat, repeating operations 6 to 1 in the reverse order, paying particular attention that the cover fits over all parts of the frame perfectly, especially around the two lap belt guides (F) threading the elastics under each of them. Ba Sta the rea ins ord Cle ver Th mu Ho Th rem car ric Ne Do ou Th ano sin and WA car Cle Cle an Ne mo be Ch It i dit to ics den ps, as- Backrest Start from the headrest making sure you insert the elastic and the section of the fabric in the rear cover. Now fit the cover on, following the instructions for operations 1 and 2 in reverse order. Cleaning and maintenance of the seat covers The cleaning and maintenance operations must only be carried out by an adult. [. . . ]