User manual CHICCO SKIP

[. . . ] Ensure that during these operations, the movable parts of the stroller do not come into contact with your child. WARNING: never leave the stroller on a sloped surface with a child on board, even with the brakes applied. Do not let other children play unattended close to the stroller or climb on it. To prevent the risk of choking, do not give to your child, or place near him/her, any objects with strings. [. . . ] To check that it is correctly fixed, ensure that the metal pin extends from the provided holes (diag. WARNING: Ensure that the wheel block is applied by keeping the brake on the external side. To complete assembly, insert the soft tab located in the centre of the wheel assembly into the provided metal slot (diag. HOW TO OPEN THE STROLLER WARNING: When opening the stroller, ensure that your child, or other children, are at a safe distance. Ensure that during these operations the movable parts of the stroller do not come into contact with your child. Press the locking mechanism downward with the tip of your foot to open the stroller fully, and lock it in the open position. wARNING: Ensure that the stroller is locked in the open position , by checking that the rear locking mechanism is effectively secured. HOW TO USE THE SAFETY HARNESS This stroller has a 5-point safety harness that features two shoulder straps, two adjustment slots, a waist strap and a crotch strap with buckle. After sitting the child in the stroller, fasten the harnesses by fastening the shoulder straps to the prongs (Diag. WARNING: To ensure your child's safety, always use the safety harness. For greater safety, the stroller is equipped with D-rings to enable fastening of an additional BS 6684 standard-compliant safety harness. The rings are located externally, beside the stroller seat, on both the right and left side, as shown in diagram 6. HOW TO ADJUST THE BACKREST The backrest can be adjusted to an infinite number of positions. To recline the backrest, pull the lever located on the back of the backrest (Diag. To raise the backrest, pull the strap upward and release it when the backrest is in the desired position (Diag. WARNING: The child's weight can make these operations more difficult. REAR BRAKES The rear wheels are equipped with linked brakes that make it possible to apply the brake to both rear wheel assemblies at the same time using only one pedal. To operate the brakes of the stroller, push one of the two levers located in the centre of the rear wheel assemblies downward, as shown in diagram 9. To release the brakes, push one of the two levers located in the centre of the rear wheel assemblies upward, as shown in diagram 10. wARNING: Always apply the brakes whenever the stroller is stationary. Never leave the stroller on a sloped surface, with a child on board, even with the brakes applied. WARNING: after having activated the brake lever, ensure that the brakes are correctly applied to both rear wheel assemblies. [. . . ] Please read carefully the instructions on the accessories available for the model purchased. To fasten the rain cover, pass the straps around the stroller frame in the positions shown in diagram 18. After use, if the rain cover is wet, let it dry in the air before folding the rain cover to store it. WARNING: Do not use the rain cover if the stroller is not fitted with a hood or sun-canopy to prevent the risk of suffocation. [. . . ]