User manual CHICCO SNAPPY COAL

[. . . ] In particular, ensure that the stroller is locked in the open position, by checking that the rear-locking device is effectively locked. € Do not use accessories, spare parts or any component not supplied or approved by the manufacturer. € WARNING: be careful, any load attached to the handle affects the stability of the 16 pram/pushchair. € WARNING: the use of the crotch strap and safety harness is necessary to guarantee the safety of your child. [. . . ] Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water. Certain models include a seat pad which should be cleaned following the instructions on its care label MAINTENANCE Lubricate the moving parts only if necessary, with the light application of a silicone based lubricant. Regularly check the condition of the wheels and, keep them clean of dust and sand. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. LIST OF COMPONENTS Check that you have all the parts required for this model before assembling the product. If any parts are missing, please contact the Chicco Customer Care Service. The following parts are needed to assemble the product: 1 stroller 1 hood 1 rain cover 1 stroller carry bag (79255. 930) 1 shoulder carry strap (79254) 1 seat pad (79254) OPENING INSTRUCTIONS 1. Press the safety lock down with your foot as shown in the drawing (diag 3. ) WARNING: pushing down the bar C which connects the two rear wheels (see ‘components’) does not guarantee that the stroller is open correctly. 4A) on the stroller, by turning it towards the front and use the Velcro fasteners on the edges to secure it to the frame (diag. 4B) WARNING: ensure that the sun hood is securely fitted on the relative support by pressing it downwards until you hear it click into place. WARNING: this adjustment is more difficult when the child is seated in the stroller. We recommend you adjust the backrest before placing your child in the seat. To apply the brakes, press the levers on the rear wheels downwards (diagram 6). Never leave the stroller on a sloping surface with a child inside, even with the parking brake ON. WARNING: after applying the brake lever, check that the brakes are locked in place on both rear wheels. To unlock the swivel wheels, lower the lever fitted between the two wheels (diag. WARNING: the swivel wheels make the stroller easier to manoeuvre; it is however recommended to use the wheels in a locked position on uneven ground to guarantee better stability (on gravel, unpaved roads etc. Adjust the shoulder straps so they fit over the child’s shoulders. WARNING: the safety harness must always be fastened to guarantee complete safety for your child. For extra safety, the stroller is fitted with D rings, which can be used to fit a separate safety harness, compliant with BS 6684 Standards. [. . . ] WARNING: The rain cover cannot be used on a stroller that has no canopy or sun-hood as it could suffocate the child. When the rain cover is fitted on the stroller, never leave it exposed to direct sunlight with the child inside, as the temperature will rise considerably. The stroller also includes a handy carry bag for use when storing or carrying it (diag. 13 A); open the bag and place the folded stroller inside, as seen in diagram 13 B. [. . . ]