User manual CHICCO TRIO FOR ME NACELLE

[. . . ] WARNING: Do not fit to the carrycot any accessories, spare parts or components not supplied or approved by the manufacturer. Declines all responsibility with regard to any changes made to the product. [. . . ] ­ Insert the two metal ends into the appropriate supports B and C, located in the central part of the carrycot, until a click is heard, indicating that they are locked correctly into position (diagram A); then fix the 4 pins of the rear arch (diagram B). NB:The connection system is set inside plastic supports B and C, the round button on the support only serves to hook on the hood (see point 3). 3 ­ To remove the canopy, first extract the 4 pins of the rear arch (diagram 3A), then release the front arch, pressing the two buttons located on the base of the locking device (diagram 3B). WARNING: The incorrect unlocking of the canopy may cause the breaking of the pins. When not in use, the sun visor can be folded inside the canopy (diagram 4). Inside the hood, between the visor and the first section, there is a fabric ring from which you can hang soft toys, with convenient hooks (figure 4 a). WARNING ­ use only Chicco toys with the following code numbers: 71530, 7138, 7139, 71330. rEAR OPENING 5 ­ To ensure maximum ventilation , the canopy has an adjustable rear opening. To adjust the opening, open the zip (diagram 5A) and fold the fabric panel onto the upper part of the canopy (diagram 5 B). aDJUSTABLE BACKREST COMFORT SYSTEM 6 ­ The backrest of the carrycot can be adjusted gradually. To raise or lower the backrest, operate the external rear wheel of the carrycot, located near the end of the carrycot (diagram 6). wARNING: It is recommended to ventilate the carrycot after prolonged use. CARRY HANDLE 7 - The carrycot has a practical carry handle that can be adjusted to three positions (diag. 7): A) Carrying position B) Intermediate position C) Rest position 8 ­ To position the handle vertically, hold it in a central position and pull it in an upward direction, until a clack is heard, indicating that it is correctly locked into position (diagram 8a). [. . . ] (carrying position) until a clack is heard, indicating it is locked into position (diagram 14). 15 - Press the grey button located in the front part of the pram (diagram 15 A); then, while keeping the button pressed, lift the carrycot from the frame (diagram 15 b). [. . . ]