User manual CHICCO TRIO FOR ME POUSSETTE

[. . . ] Ensure that during these operations, the movable parts of the stroller do not come into contact with your child. WARNING: never leave the stroller on a sloped surface with a child on board, even with the brakes applied. Do not let other children play unattended close to the stroller or climb on it. To prevent the risk of choking, do not give to your child, or place near it, any objects with strings. [. . . ] WARNING: Before using the stroller with the seat fitted to It, always check that the seat is correctly assembled to the stroller. To fit the seat in the forward facing position, open the seat and align the housings to the tubes, as shown in diagram 17. To carry out this operation more easily, refer to the positions of points A and B shown in diagram 17. When the holes located on the seat are aligned to the joints located on the frame, push the seat in a downward direction, until a click is heard, indicating that the seat is locked correctly into position (diag. WARNING: Before using the stroller with the seat fitted to it, always check that the seat is correctly assembled to the stroller. HOW TO REMOVE THE SEAT The seat can be removed without removing the fabric cover. Push the side knob A, located under the seat, and raise the seat in an upward direction (diag. WARNING: The child's weight can make these operations more difficult. Open only one side of the bumper bar to place the child into the stroller more easily. WARNING: Never use the bumper bar to lift the stroller with the child sitting in it. Press the button, located on the handle, to turn the handle to the desired position and adjust its height to the position that is most comfortable for the user (diag. WARNING: During use, the handle must not be used in the lowered position (diag. During use, the handles must be in the high position, as shown in diagram 24 B. To fit the joinable handle, press the two central levers inside, at the same time (see diag. 25 A); then align and insert the joints A and B into the respective holes (diag. A click will be heard, indicating that the joints have been fitted correctly into position. To remove the joinable handle, press the two central levers inside, at the same time (diag. WARNING: Before using the stroller with the "joined handle", always check that the handle has been fitted correctly. WARNING: To close the stroller, it is always necessary to remove the joinable handle. WARNING: Never use the joinable handle to lift the stroller with the child sitting in it. SAFETY BRAKE The safety brake locks both of the rear wheels of the stroller at the same time. The red STOP label will appear automatically and the left lever will move upwards. [. . . ] To fit the shopping basket to the stroller, fasten the spring catches A, located on the basket, to the two hooks located on the upper part of the stroller, then fix the 4 rings to the hooks B (diag. It is necessary to remove all objects from the shopping basket before closing the stroller. BAG Some versions come with a practical carrying bag, which is supplied with a changing mat. To ensure maximum functionality when using the stroller, a specific compartment has been created inside the bag, where you can store the joinable handle (diag. [. . . ]