User manual CISSELL PUFFIRONDMAN343

[. . . ] The warranty is void on equipment or parts; that have been subjected to misuse, accident, or negligent damage; operated under loads, pressures, speeds, electrical connections, plumbing, or conditions other than those specified by Cissell; operated or repaired with other than genuine Cissell replacement parts; damaged by fire, flood, vandalism, or such other causes beyond the control of Cissell; altered or repaired in any way that effects the reliability or detracts from its performance, or; which have had the identification plate, or serial number, altered, defaced, or removed. No defective equipment or part may be returned to Cissell for repair or replacement without prior written authorization from Cissell. Charges for unauthorized repairs will not be accepted or paid by Cissell. CISSELL MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY, STATUTORY OR OTHERWISE, CONCERNING THE EQUIPMENT OR PARTS INCLUDING, WITHOUT LIMITATION, A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, OR A WARRANTY OF MERCHANTABILITY. [. . . ] 3/4" Pipe Connection Vacuum Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4" Connection Vacuum Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" Press Capacity Boiler Horsepower Single Puff Iron Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Double Puff Iron Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Triple Puff Iron Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 H. P. APPROXIMATE APPROXIMATE SHIPPING WEIGHTS UNIT (with fabric pressing heads) 33" Double Table with 2 and 4-C with extension and bracket. 33" Double Table with 1-L, 2; 15-1/2" Single Table with 4-C with extension and bracket. (210. 9 kg. ) 74" x 23" x 53" (188 cm x 58 cm x 135 cm) 52. 2 cu. (1. 48 m³) 66" x 23" x 51" (168 cm x 58 cm x 130 cm) 44. 8 cu. (1. 27 m³) DOMESTIC EXPORT EXPORT SHIPPING DIMENSIONS 175 lbs. (47. 6 kg) 18" x 15" x 53" (46 cm x 38 x 135 cm) 8. 3 cu. (0. 24 m³) (without fabric pressing heads) 33" Double Table with 2 and 4-C with extension and bracket. (201. 9 kg. ) 74" x 18" x 50" (188 cm x 46 cm x 127 cm) 38. 5 cu. (1. 09 m³) 41" x 29" x 47" (104 cm x 74 cm x 119 cm) 32. 2 cu. (0. 91 m³) 20" x 15" x 50" (51 cm x 38 cm x 127 cm) 8. 7 cu. (45. 7 kg. ) Page 6 Support Bars See Separate Page PARTS PUFF IRON "D" MODEL TABLE PARTS Ref. TU7733 F225 P454 P219 P165 P153 P154 TU2847 Description #8 x 1/2" Self Drill Screw (Pkg. Bolt, 1/4 20 x 1/2" Triple Top - 38" Double Top - 33" Single Top - 15-1/2" Cut Washer, 1/4" Ref. TU2846 TU4934 P509 P455 P513 P512 P511 P528 Description Lockwasher, 1/4" Hex Nut, 1/4" - 20 Phillips Screw, 1/4" 20 x 5/8" Left Table Leg Triple Front Panel Asm. * Double Front Panel Asm. * Single Front Panel Asm. * Spacer Ring (Supply) * Consists of Front Panel, Cissell Namplate, screws and washers. NOTE: For service, new design allows easy access from front of machine by removing front panel screws and washers. Nuts are welded to table legs. Page 7 BACKS, TABLE BACKS, CORNER, EXTENSION & BRACES Ref. [. . . ] Disconnect valve lever (4) from disc valve by removing cotter pin and stem. Be sure to use pipe dope on threaded end of tube. Page 21 TO REPLACE UPSTEAM SPREADER IN HEAD A. Hit wrench with hammer (two or more very firm hits) to break corrosion bond between threads of brass spreader and aluminum head. Unscrew spreader (9) counter-clockwise and remove with old gasket (10). [. . . ]