User manual CITIZEN WATCH H460

[. . . ] English Names of Components NO: Reception result SET: Indicated when a time difference has been set ±0: Indicated when no time difference has been set Hour hand RX: Reception standby H, M, L: Reception level/reception result Button (B) SE T WThis watch is a radio wave watch that W receives the standard time radio wave transmitted in Germany. This radio wave watch is equipped with a regular automatic reception function that sets the time and date by automatically receiving radio waves twice a day at 3:00 AM and 4:00 AM, and a free reception function that allows the time to be set arbitrarily by receiving radio waves. A time difference can also be set in 1 hour units based on German standard time. Minute hand 0 Crown Second hand Button (A) The design may differ slightly depending on the model. 2 3 · This watch only receives the standard time radio wave transmitted in Germany during radio wave reception. · When using the watch in a location that has a different time difference than that of Germany, set the time difference by referring to the section entitled, "5. If the standard time radio wave transmitted in Germany is received after setting the time difference by another method, the time will return to German standard time. WPlease use this watch afterW charging sufficiently by placing in light. If the second hand of the watch is moving at two-second intervals while the watch is in use, this indicates that the watch is insufficiently charged. [. . . ] Notes: · Correct the time difference while being careful not to mistake AM, PM or the date. · Time difference can be corrected for 10 seconds after pressing button (B) or for 10 seconds after the hour hand has stopped moving after correcting the time difference. · The watch automatically returns to the normal display if the crown has not been operated for 10 seconds after pressing button (B) or 10 seconds after correcting the time difference. 38 39 Example: Setting to London time when the time in Germany is 10:10 AM The time difference between London and Germany is -1 hour. When the time in Germany is 10:10 AM, the time in London is 9:10 AM. [Normal Display] SE T [Time Difference Correction Mode] Button (B) T Press button (B) once Returns automatically after 10 seconds or when button (B) has been pressed 1 second interval movement Turn the crown to set the time difference <Setting the Time Difference in this Case> (1) Put the crown in the normal position. · The second hand moves to the ±0 position indicating that the watch has entered the time difference correction mode. (3) Turn the crown to the left to turn back the hour hand by one hour. · Once a time difference has been set, the second hand moves to the SET position. The second hand returns to onesecond interval movement. 0 SE 0 40 0 SE T 41 <Confirmation of Time Difference Setting> · When the crown is put in the normal position and button (B) is pressed once, the second hand moves to the SET or ±0 position to indicate the time difference setting status. Note: If the crown is turned while the time difference setting status is displayed, the hour hand will move and a time difference will be set that causes the time to change. · To return to the normal display, either press button (B) again or simply wait for 10 seconds. · When the second hand points to SET: Time difference is set · When the second hand points to ±0: Time difference is not set. <Canceling Time Difference> Cancel the time difference by moving the hour hand in the opposite direction of that when the time difference was set. · When the time difference has been set ahead (forward direction): Turn back the hour hand by the number of hours it was advanced. · When the time difference has been set back (reverse direction): Advance the hour hand by the number of hours it was turned back. · The second hand moves to the SET position and the watch enters the time difference correction mode. (2) Turn the crown to move the hour hand until the second hand points to ±0. · When the crown is turned (one click) to the right, the hour hand turns forward (clockwise) by one hour, and when turned (one click) to the left, the hour hand turns backward (counter-clockwise) by one hour. · The date setting changes if the hour hand is moved in the same direction as when the time difference was set. Always make sure to move the hour hand in the opposite direction in which the time difference returns to zero. 42 43 (3) Either press button (B) again or simply wait for 10 seconds, after which time the watch automatically returns to the normal display. · The time difference setting is now canceled and the second hand returns to onesecond interval movement. [Time difference is set] [Time Difference Correction Mode] Press button (B) once SE T SE T SE T SE T 6. Solar-Powered Watch Handring Notes This watch uses a secondary battery (rechargeable battery) to store electrical energy. Once fully charged, this watch will continue to keep the correct time for about 6 months during normal use (when the Power Save function is not activated). Furthermore, the watch will keep the correct time for about 2 years when the Power Save function is activated. [Time Difference Canceled] Press button (B) once SE T <For Optimum Use of this Watch> In order to use this watch comfortably, try to keep the watch charged at all times. Charge the watch by exposing the watch dial (containing the solar cell) to direct sunlight or light from a fluorescent lamp. [. . . ] · If moisture has entered the watch, or if the inside of the crystal is fogged up and does not become clear within a day, immediately take the watch to your dealer or Citizen Service Center for repair. Leaving the watch in such a state will allow corrosion to form inside. Cleaning the Watch · Use a soft cloth to wipe off dirt, perspiration and water from the case and crystal. · Use a soft, dry cloth to wipe off perspiration and dirt from the leather band. · To clean a metal, plastic, or rubber watchband, wash away dirt with water. [. . . ]