User manual CITIZEN WATCH U040

[. . . ] Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Component Parts and their Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching Digital Functions (Modes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Turn on the EL Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Using the Alarm [AL1/AL2] Alarm 1 and Alarm 2 are different in sound only, and operating methods etc. Once the alarm is set (On), the alarm sounds for about 15 seconds at the set time every day. [Normal Alarm Display "ON"] Time difference from UTC (6) Press the button A to correct the "Minute. " (7) Press the button M to return to the normal display. * If the watch is set to 12-hour display of Time mode, Alarm will also be set to 12-hour display. * Auto-Return to normal Alarm display will be activated when the watch is left in Alarm correction state for about 2 minutes. * If the button M is pressed in the Alarm correction state, a quick return is made to the normal Alarm display. <To Switch Alarm On/OFF> When button A is pressed in normal Alarm display, "On" and "OF (OFF)" are changed each time the button is pressed. When Alarm is set to "On", "A1" or "A2" turns on in the digital display. <Alarm Monitor> Press and hold button A in Alarm mode to make the Alarm monitor sound. Alarm time M A B City name On or OF (OFF) <How to Set Alarm> (1) Press the button M to set Alarm 1 or Alarm 2 mode. (3) If the button B is pressed continuously for about 2 seconds, the alarm is turned On and "Hour" blinks. (4) Press the button A to correct the "Hour. " (Press and hold button A for rapid advancement. ) (5) Press the button B to blink the "Minute". 16 17 10. Using the Chronograph [CHR] This chronograph allows you to measure and display to maximum "23 hours 59 minutes 59 seconds 99" in units of 1/100 of a second. After the completion of 24hour measurement, it returns to the reset display and stops. [Chronograph Reset Display] Time difference from UTC <Elapsed Time Measurement> (1) Press the button M to set the chronograph mode. (2) When the button A is pressed, it starts, and if the button A is pressed while measuring, it stops. (3) If the button B is pressed while stopped, it returns to the reset display. <Split Time Measurement> Every time the button B is pressed during chronograph measuring, the newest split time is displayed for about 10 seconds. (3) If the button B is pressed continuously for about 2 seconds or longer, "On" or "OF" blinks. (4) Press the button A to select display (On) or non-display (OF) of the city. (5) If the button B is pressed, "SMT (abbreviation of summer time)" and "On" or "OF" blink. 23 (6) Press the button A to select the summer time setting (On) or cancel (OF). In order to set for another city, watch enter the correction state for the next city by pressing the button B again. [. . . ] CAUTION Replacing the Battery · For replacement of the battery, take your watch to your dealer or Citizen Service Center. · Replace the battery as soon as possible if the service life of the battery has expired. Leaving a depleted battery in the watch may result in leakage, which can damage the watch severely. CAUTION Operating Environment · Use the watch within the operating-temperature range specified in the instruction manual. 31 CAUTION Keep Your Watch Clean · Leaving dust and dirt deposited between the case and crown may result in difficulty in pulling the crown out. [. . . ]