User manual CLATRONIC WE 611 NEW

[. . . ] To avoid the risk of fire or an electric shock, you should not expose the device to rain or moisture. Consequently, do not use the device in the immediate vicinity of water - for example near a bath tub, a swimming pool or in a damp cellar. When using external mains supply, pay attention to the correct polarity and voltage. [. . . ] Please read the operating instructions carefully before using the radio recorder for the first time!Select a suitable location for the radio recorder, such as a dry, flat, non-slip surface on which it is easy to operate the machine. If you do not use the machine for a prolonged period, remove the mains plug from the socket and remove the batteries in order to prevent battery acid from leaking. Please return used batteries to the relevant collection points or the shop where they were bought. AC Adapter Mode (not supplied) You can also use the device with an adapter. Connect the device to the wall power supply by inserting the plug of the power pack into the DC 5 V socket (17). If you use the power pack, please ensure the correct polarity as shown by the inscription on the device. HOLD OFF/ON (3): TONE LOW/HI (10): This blocks the functions of all buttons on the device as protection against unintentional release of a button. Turn the volume control (9) to set the volume high enough so that you can clearly hear a hiss or a station that has already been set. Extend the telescopic antenna (15) and turn it until reception improves. With the frequency range switch (12) you can select the frequency range of the SW band (SW = shortwave), which is divided up into 10 sections. Once a station has been correctly set, the red TUNE control lamp (2) lights up. NOTE: The TUNE control lamp only lights up in the FM band or in the case of strong interference transmitters as it is not possible for recognition to take place between the transmission signal and the interference signal (this is usually noticeable due to the strong hiss). If you are inside a building or on a train, place the device near a window in order to improve reception. Any marks on the surface can be wiped off with a slightly damp cloth without any additives. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]