User manual COMPRO V150F START UP GUIDE

[. . . ] No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Compro Technology, Inc. Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are trademarks of Compro Technology, Inc. COMPRO makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. COMPRO reserves the right to make revisions to this publication without obligation to notify any person or entity of any such changes. [. . . ] After you have connected the power adaptor, you can press the power switch to turn on the TV box and you will see the green LED light beside the power button. The default TV settings will be your local country and TV system, and you can change it from OSD menu later. If you have connect V150/V150F TV box to your computer's video card, press the power button on the TV box to switch between TV and PC signal. Order of the Sources: TV AV (Composite) S-Video FM TV. . . VideoMate V150/V150F TV Box supports 60 and 75 Hz with 9 resolutions from below. Resolution 1 -> 640*480 (4:3) Resolution 2 -> 800*600 (4:3) Resolution 3 -> 1024*768 (4:3) Resolution 4 -> 1280*720 (16:9) Resolution 5 -> 1280*1024 (5:4) Resolution 6 -> 1400*1050 (4:3) Resolution 7 -> 1440*900 (16:10) To change resolution, please open up menu and select the resolution you want. "Resolution" button from the remote controller can also switch the resolution. If using PIP feature, the refresh rates in Windows support resolutions below: Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024 1280 x 720 1440 x 900 1400 x 1050 60 Hz Yes Yes Yes Yes Yes Yes Yes Yes Support Refresh Rate 70 Hz 72 Hz Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 75 Hz Yes Yes Yes Yes Yes Yes Yes Yes 9 OSD Menu Guide Menu button will open up OSD Menu, please use the direction key to navigate. (Picture) Brightness Contrast Saturation Sharpness Hue OptiColor Mode (TV) (Monitor) (OSD) (Sound) Adjust the brightness (0~100) Adjust the Contrast (0~100) Adjust the Saturation (0~100) Adjust the Sharpness (0~15) Adjust the Hue ( 0~100) 3 preset modes (Standard/TV, Game, and Cinema) and 5 custom modes of picture settings. You can adjust the color settings then save it in custom mode. (Picture) Input Signal Channel Rename Fine tune Auto Scan Channel Swap CH Add/Erase Channel Video System (TV) (Monitor) (OSD) (Sound) Select Air or Cable for TV input signal type. (Only appears in countries with 2 or multiple TV systems) FM Mode: While listen to FM radio, this OSD page will different with TV mode. (Picture) Auto Scan (FM) (Monitor) (OSD) (Sound) Recommend to use Auto Scan for the first time. (5 letter/numbers) Rename 10 (Picture) Resolution Refresh Rate Noise Reduction OptiRatio Display Type Input Source (TV) 640*480 1280*1024 (Monitor) 800*600 1400*1050 (OSD) (Sound) 1024*768 (default) 1280*720 1440*900 60Hz (default) 75Hz Adjust level of noise reduction. (0~8) Default is 4 4:3 16:9 SmartZoom Panorama Full LCD (default) CRT PDP TV AV (Composite) S-Video FM PC Use right and left direction key to adjust the position of Position Finetune screen (Picture) (TV) (Monitor) (OSD) (Sound) OSD Position Use direction keys to move OSD position OSDTransparency 1 2 3 4 Language Select your language (Default is your local country) Information VideoMate V150F/V150 Version information Reset All Settings NO/YES (1 Cancel / 2 Reset All Settings) Country/Region Select your country or region (Picture) Volume Treble Bass Dynamic Bass Boost Stereo Effect SAP Mode Reset (TV) (Monitor) (OSD) (Sound) Adjust volume (0-50) Adjust Treble volume (0-15) Adjust Bass volume (0-15) ON/OFF (Default is OFF) Adjust Stereo Effect (0~8) Default : 0 ON/OFF (Default is OFF) (Only appears in PAL/SECAM TV system area) Reset sound settings (NO/YES) Channel Swap To swap the channel numbers, please select Channel Swap from the menu then select YES, and it will show as a sub menu. You may browse with the direction keys; Up and Down are going through the list while Left and Right are changing 11 pages of the list. Select the channel number that you wish to swap and press OK, and then enter the number of the channel that you wish to switch. To reset to the original channel numbers, please rescan the channel table again by selecting Auto Scan in the menu. My Favorite Channel List My favorite channel list can store up to 10 channels that you watch the most and browse with "Fav. To add channels to the favorite list, please turn to the channel you wish to add and press "Set Fav" on the remote control. Press "OK" on the selected position. PIP (Picture In Picture) You can start PIP function by clicking "PIP" button on the remote control. When PIP is working, press "PIP" button again will change the size of the TV screen; you may zoom twice and the third time you press "PIP", it will close the PIP function. The PIP feature can supports up to 1440 x 900 windows' resolution. Note: If you need to move the TV screen position on Windows desktop, please press the "OK" to switch the keys of channel and volume up/down into direction key, and you can move the PIP TV windows to the place you want. Channel Surfing Channel Surfing allows you to preview and find the channel you want by presenting in 9 squares. [. . . ] Also make sure computer grounding is good. Why PIP does not work? Please make sure you have connected your computer VGA to V150/V150F and connect V150/V150F to the monitor. For more information, please refer to the TV box connection description. If your display card of your computer has both DVI and VGA connected, please make sure the settings in Windows is set to VGA output. Please also check if your desktop resolution is one of our supported resolutions. [. . . ]