User manual COMPRO W700F START UP GUIDE

[. . . ] No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Compro Technology, Inc. Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are trademarks of Compro Technology, Inc. COMPRO makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. COMPRO reserves the right to make revisions to this publication without obligation to notify any person or entity of any such changes. [. . . ] The default TV settings will be your local country and TV system, and you can change it from OSD menu later. If you have connect W700F TV box to your computer's video card, press the power button on the TV box to switch between TV and PC signal. Order of the Sources: Analog TV FM Composite video S-Video Conponent video Analog TV . . . VideoMate W700F TV Box supports 60 and 75 Hz with 9 resolutions from below. Resolution 1 -> 800*600 (4:3) Resolution 2 -> 1024*768 (4:3) Resolution 3 -> 1280*1024 (5:4) Resolution 4 -> 1400*1050 (4:3) Resolution 5 -> 1440*900 (16:10) Resolution 6 -> 1600*1200 (4:3) Resolution 7 -> 1680*1050 (16:10) Resolution 8 -> 1920*1080 (16:9) Resolution 9 -> 1920*1200 (16:10) To change resolution, please open up menu and select the resolution you want. "Resolution" button from the remote controller can also switch the resolution. If using PIP feature, the refresh rates in Windows support resolutions below: Resolution 800 x 600 1024 x 768 1280 x 1024 1440 x 900 1400 x 1050 1600 x 1200 1680 x 1050 1920 x 1080 1920 x 1200 Support Refresh Rate 60 Hz 75 Hz Yes Yes Yes Yes Yes No Yes No Yes No Yes No Yes No No No No No OSD Menu Guide (Analog TV and FM Radio) Menu button will open up OSD Menu, please use the direction key to navigate. Picture Brightness Contrast Saturation Hue Sharpness OptiMode Adjust the brightness (0~100) Adjust the Contrast (0~100) Adjust the Saturation (0~100) Adjust the Hue ( 0~100) Adjust the Sharpness (0~15) 3 preset modes (Standard/TV, Game, and Cinema) and 5 custom modes of picture settings. You can adjust the color settings then save it in custom mode. TV Function Input Signal Select Air or Cable for TV input signal type. (0~100) default is 50 Channel Rename Set a name for specific channel. Add and edit your custom channel Resolution Resolution Swtich resolution: 800x600 1024x768 (default) 1280x1024 1440x1050 1400x900 1680x1050 1600x1200 1920x1080 1920 x1200 Adjust level of noise reduction. (0~8) 4:3 16:9 SmartZoom Default is 4 Full Panorama Noise Reduction OptiRatio Input Source Analog TV, Component, Composite, S-Video, FM Position Finetune Use right and left direction key to adjust the position of screen OSD Settings Country/Region Select your country or region 10 Language OSD Position Information Reset all settings Select your language (Default is your local country) YES/NO (Default is NO) VideoMate W700F Version information NO/YES (1 Cancel / 2 Reset All Settings) OSD Transparency 0-100 Audio Settings Volume Treble Bass Dynamic Bass Boost Stereo Effect Reset Adjust volume (0-100) Adjust Treble volume (0-15) Adjust Bass volume (0-15) YES/NO (Default is NO) Adjust Stereo Effect (0~8) Default : 0 Reset sound settings (YES/NO) FM Mode: While listen to FM radio, this OSD page will different with TV mode. FM Station List CH 1 CH 2 . . . . . . . . . . List all the available FM channel and frequency FM Station Scan Auto Scan Add Channel Delete Channel Reset all Auto scan the available FM channel Add FM channel by directly frequency input Delete FM channel NO/YES (1 Cancel / 2 Reset All Settings) Channel Swap To swap the channel numbers, please select Channel Swap from the menu then select YES, and it will show as a sub menu. You may browse with the direction keys; Up and Down are going through the list while Left and Right are changing pages of the list. Select the channel number that you wish to swap and press OK, and then enter the number of the channel that you wish to switch. To reset to the original channel numbers, please rescan the channel table again by selecting Auto Scan in the menu. My Favorite Channel List My favorite channel list can store up to 10 channels that you watch the most and browse with "Fav. To add channels to the favorite list, please turn to the channel you wish to add and press "Set Fav" on the remote control. Press "OK" on the selected position. PIP (Picture In Picture) You can start PIP function by clicking "PIP" button on the remote control. When PIP is working, press "PIP" button again will change the size of the TV screen; you may zoom twice and the third time you press "PIP", it will close the PIP function. The PIP feature can supports up to 1680 x 1050 windows' resolution. Note: If you need to move the TV screen position on Windows desktop, please press the "OK" to switch the keys of channel and volume up/down into direction key, and you can move the PIP TV windows to the place you want. Channel Surfing Channel Surfing allows you to preview and find the channel you want by presenting in 9 squares. To access this function, please press "Ch. Surf" button on the remote controller. [. . . ] Also make sure computer grounding is good. Why PIP does not work? Please make sure you have connected your computer VGA to W700F and connect W700F to the monitor. For more information, please refer to the TV box connection description. If your display card of your computer has both DVI and VGA connected, please make sure the settings in Windows is set to VGA output. Please also check if your desktop resolution is one of our supported resolutions. [. . . ]