Detailed instructions for use are in the User's Guide.
[. . . ] If there is no suitable pan put on the right hob in one minute, the hob will go automatically into the standby state, and the buzzer will sound for warning at one time. Heat Indication When the hotplate is used for a long time, waste heat remains in the heating zone in a few minutes. The code "H" appears, warning to be away from the heating zone. Protection of Shutting Down Automatic Shutting down Automatic is a safety protection function for your induction hotplate. [. . . ] The boost function only operates for 5 minutes, after which the cooking zone returns to its orginal setting. As the boost function is activated , the other cooking zone of the same side is limited under level 2 automatically(for example, when the 2nd cooking zone's boost function is activated, the 1st cooking zone which is of the same left side will be limited under level 2 automatically). Cancellation of "Boost" function When in the "Boost" function, select the relevant heating zone with the "Boost" function, and press the "Boost" button or the "-" button to cancel the Boost function, then the cooking zone will revert to its original setting. The power setting immediately chang to 0, and this heating zone switch off at the same time. AND Timing function Select the relevant cooking zone, and set the power level with the "+" or "-" button. The cooking zone 1 with power level 6) Press the "Timing" button, the timing indicator flashes, and you can set the timer at this point. AND Using the "+" and "-"buttons, you can realize the setting of timing from 0 to 9:59 minutes. Press the "+" key once increases the time by one minute ; hold down the "+" key increases the time by 10 minutes . When the time exceeds 1 hour, hold down the the "+" key increases the time by 30 minutes . Press the "-" key once decreases the time by one minute ; hold down the "-" key decreases the time by 10 minutes . When the time exceeds 2 hours, hold down the the "-" key decreases the time by 30 minutes . Timing confirmation: After selecting a set time, once the timing indicator flashes for 5 seconds, or press the "Timing" button, the set time will be confirmed to be valid automatically. Timing cancellation: If press the "+" and "-" simultaneously, the timing can be cancelled automatically, with the timing indicator showing "0". In the timing state, the power level of the relevant cooking zone can be changed, and the time set is still valid. Press the timing button without select one cooking zone when the induction hotplate is working, the time-warning function will operate. When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. Then it will be shown the new first expiring timer and the corresponding zone will have the dot flashing. Interlock Function: To ensure the safety of children, the induction hotplate is provided with the function of interlock. Interlock: Press the "Interlock" button, then the induction hotplate enters the locking state, with the timing indicator showing "Loc". Unlock: Holding the "Interlock" button for about 3 seconds, the locking state will be removed. [. . . ] By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way. the symbol on the product indicates that it may not be treated as normal household waste. It should be taken to a collection point for the recycling of electrical and electronic goods. For further information regarding the treatment, recover and recycling of this product please contact your local council, your household waste disposal service, or the shop where you purchased it. [. . . ]