User manual CURTIS TID981

[. . . ] Connect one end of coiled cord to the jack of handset, connect the other end to the jack of the base set. Plug one end of flat cable to line jack of this phone, plug the other end to wall jack. [. . . ] During handsfree dialing, slide the knob up to increase the volume, or slide the knob down to decrease it. The call is disconnected Redialing You can redial the last number called with just one touch of the REDIAL button. This lets you easily redial the same number again if the line was busy. Press [REDIAL], the last sequence of digits dialed will be automatically redialed. Putting a call on hold The HOLD button allows you to temporarily suspend a phone conversation without disconnecting the call. Press HOLD, a simple rhythm tone will be heard by both sides you can place the handset back on the cradle. If you did not place the handset back on the cradle, press SP-PHONE BUTTON. When a call is put on hold, this unit will mute the microphone automatically, so the other party will not hear from your side. Press `flash' button to switch to the waiting call without disconnecting the current call. Viewing the Caller ID list This phone automatically stores the data of the last 55 calls received. [. . . ] Filtering unwanted calls The numbers stored in the one-touch dialing memory are regarded as "preferred calls". When the filter feature enabled, the numbers which are not stored in the memory are regarded as "unwanted calls". [. . . ]