User manual DE DIETRICH DKP823W

[. . . ] It also includes guidelines for setting up UNIX, Windows NT 4. 0/2000/Server 2003, and Novell NetWare servers to provide printing services to users. · The Printing Guide describes the printing features of the Fiery for users who send jobs from their computers using the EFI PostScript driver. · The Color Guide provides information on managing the color output of the Fiery. It explains how to calibrate your Fiery and take advantage of the ColorWise® color management system, as well as features in ColorWise Pro ToolsTM. [. . . ] The amount of network traffic determines the amount of time required for the Browse function. NOTE: You can also locate the printer with the Find feature on your Windows computer. If you are not able to locate your C9800, contact your network administrator. 3. Double-click the name of the Fiery to display enabled print connections. 4. Double-click the name of the connection you want to print to. The Printers dialog box appears, asking whether you want to set up the printer. 5. Select Yes to complete the installation for the selected connection. Windows NT 4. 0 downloads the printer driver and printer description files from the Fiery to your computer and installation is complete. 1 1-27 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003 To set up the Fiery as a PostScript or PCL printer, you must install the PostScript or PCL printer driver for Windows 2000/XP/Server 2003 and the corresponding printer description files. You must also configure the print connection between the computer and the Fiery. If you are printing over a network, you must configure a network connection. If you are printing directly to the printer, you must configure a parallel port connection. NOTE: For Windows Server 2003, use the Windows XP printer driver. NOTE: The procedures for configuring the options for the PostScript and PCL printer drivers are similar. Installing the PostScript or PCL printer driver for Windows 2000/XP/Server 2003 The following procedure describes installing the printer driver from the Drivers CD (CD1). TO INSTALL THE POSTSCRIPT OR PCL PRINTER DRIVER FOR WINDOWS 2000/XP/SERVER 2003 1. Insert CD1 into your CD drive and wait for the CD to autorun the setup program. If the CD does not autorun navigate to the CD root directory and double-click the setup. exe program to start the installer. 2. TO SET UP TWO-WAY COMMUNICATION FOR POSTSCRIPT OR PCL PRINTER DRIVERS FOR WINDOWS 2000/XP/SERVER 2003 1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-Way Communication. PS 2. Type the C9800's IP address or DNS name. PCL 1 1-31 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003 3. In the PS driver, to display the C9800's current default settings when opened, select Update Fiery Driver When Opened. In the PS driver, to receive an e-mail notification after your job has been printed, select Enable E-mail Notification, and type in the e-mail address to which notification should be sent. You will also receive e-mail notification of any errors that occur during printing. NOTE: Enable E-mail Notification is displayed only if Email Service is enabled at Setup. Click OK. Completing the Windows 2000/XP/Server 2003 printer connection To print from Windows 2000/XP/Server 2003, you must: · Set up network servers, if any. · Configure a port on each Windows 2000/XP/Server 2003 computer for the network type. To do this Configure the parallel connection Configure the TCP/IP (LPR port) connection Configure the IPX (Novell) connection See "Completing the Windows 2000/XP/Server 2003 parallel port connection" in this section. "Completing the Windows 2000/XP/Server 2003 TCP/IP and Port 9100 or LPR connection" on page 1-33. "Completing the Windows 2000/XP/Server 2003 IPX (Novell) connection" on page 1-34. NOTE: The procedures for completing the printer connection for Windows 2000/XP and Windows Server 2003 are similar. Windows 2000 illustrations are used in the following procedure, with relevant Windows XP differences noted. 1 1-32 Installing User Software on a Windows Computer Completing the Windows 2000/XP/Server 2003 parallel port connection The parallel port cable connects the Fiery to a single computer. Once you have installed the Windows 2000/XP/Server 2003 PostScript printer driver and the Fiery printer description files, complete the setup for parallel port printing. [. . . ] Browse to the System : Preferences : ColorSync Profiles folder, select the EFIRGB ICC file, and then click Open. NOTE: If you are using ColorSync 2. 5, the ColorSync profile is located in System Folder : ColorSync Profiles. Click OK. 2 2-17 Installing color files from CD2 Loading the ICC printer profile The ICC printer profile enables RGB-to-CMYK conversions that are specific to the kind of printer you are using. Choose Color Settings from the File menu and choose CMYK Setup from the Color Settings submenu. Select the profile that corresponds to the Fiery from the Profile menu. [. . . ]