User manual DELTA OL-1000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DELTA OL-1000. We hope that this DELTA OL-1000 user guide will be useful to you.


DELTA OL-1000 : Download the complete user guide (10037 Ko)

Manual abstract: user guide DELTA OL-1000

Detailed instructions for use are in the User's Guide.

[. . . ] Failure to re-adjust the valve may result in hot water burns or extreme cold resulting from variations in line pressure (such as when a dishwasher or washing machine is in use while you are taking a shower). After installation, verify that the rotational limit stop (13/14/17 series) or temperature knob (17T series) on the valve is set so that changes in line pressure or temperature do not result in uncomfortable water temperature changes. If the temperature setting of the hot water heater or inlet is changed after installation of the valve, the setting of the rotational limit stop or temperature knob also must be changed!Consult the installation instruction sheet for instructions on how to make this setting, or call us at 1-800-345-DELTA. [. . . ] Any damage to this faucet as a result of misuse, abuse, or neglect, or any use of other than genuine Delta® replacement parts WILL VOID THE WARRANTY. This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province. All parts of the Delta HDF faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for a period of five (5) years. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser's receipt. Delta will replace, FREE OF CHARGE, during the warranty period, any part which proves defective in material and/or workmanship under normal installation, use and service. Replacement parts can be obtained from your local dealer or distributor listed in the telephone directory or by returning the part along with the purchaser's receipt to our factory, TRANSPORTATION CHARGES PREPAID, at the address listed. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void for any damage to this faucet due to misuse, abuse, neglect, accident, improper installation, any use violative of instructions furnished by us or any use of replacement parts other than genuine Delta parts. If this is not a thin wall mounting, the entire plasterguard (4) may be removed. Make sure the cartridge tubes and O-rings (3) are properly seated in holes at the base of the body. The O-ring, which acts as a spacer to steady the sleeve, should rest behind the bonnet nut. If your model requires a spacer (1), insert it into the sleeve (2) and push it to the front. Secure the escutcheon (1) and backplate (2) (if your model has one) to the bracket (3) using the 2 screws provided (4). Using an Allen wrench to secure the set screw, install the handle onto the stem. If this is not a thin wall mounting, the entire plasterguard (4) may be removed. Make sure the adapter assembly is correctly positioned and is pressed all the way down inside body. Back to back Installation Make sure the key (3) on the cartridge is fully engaged with the slot in the brass body (4). For back to back or reverse installations (hot on right and cold on left): Rotate cartridge (1) so the words "HOT SIDE" (2) appear on the right. Install the cartridge making sure that the key is fully engaged with the slot in the brass body (See step C). FOR SHOWERHEAD INSTALLATION: Connect top outlet (1) to shower arm (2) with proper fittings. To prevent damage to finish on shower arm, insert wall end of shower arm into shower flange (3) before screwing arm into riser connection. [. . . ] Typical temperature for a comfortable bath or shower is between 90o­110o F. Remove the temperature knob and replace onto the splines (2), making sure that the temperature knob limit stop (3) hits against the volume handle limit stop (4) as shown. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DELTA OL-1000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DELTA OL-1000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.