User manual DEWALT D21441

[. . . ] DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. [. . . ] G If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The correct power tool will do the job better and safer at the rate for which it was designed. B Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. C Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. D Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts. Additional safety instructions for drills Wear ear protectors when drilling. Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will also make exposed metal parts of the power tool "live" and shock the operator. Markings on Tool The following pictograms are shown on the tool: Read instruction manual before use. Residual risks In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. Health hazards caused by breathing dust developed when working in concrete and/or masonry. Do not use this tool under wet conditions or in presence of flammable liquids or gases. 1 Variable speed switch 2 Lock-on button 3 Forward/reverse slider 4 Two gear selector 5 Side handle 6 Depth adjustment rod 7 Keyless chuck 8 Sleeve Auto-spindle lock The auto-spindle lock is engaged when the transmission is stationary. The chuck sleeve can easily be turned with one hand while the other supports the unit. The package contains: 1 Rotary drill 1 Side handle 1 Depth gauge 1 Kitbox (K-models only) 1 Instruction manual 1 Exploded drawing Check for damage to the tool, parts or accessories which may have occurred during transport. [. . . ] Wear approved eye protection and approved dust mask when performing this procedure. WARNING: Never use solvents or other harsh chemicals for cleaning the nonmetallic parts of the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Optional accessories Consult your dealer for further information on the appropriate accessories. [. . . ]