User manual DEWALT D21805KS

[. . . ] CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. For more information, please contact DEWALT at the address below, or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT. The definitions below describe the level of severity for each signal word. [. . . ] G If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The correct power tool will do the job better and safer at the rate for which it was designed. B Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. C Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. D Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts. Additional safety instructions for impact drills Wear ear protectors with impact drills. Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will also make exposed metal parts of the power tool "live" and shock the operator. Residual risks In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. Health hazards caused by breathing dust developed when working in concrete and/or masonry. The following pictograms are shown on the tool: Read instruction manual before use. The package contains: 1 Percussion drill 1 Side handle 1 Depth gauge 1 Chuck key 1 Kitbox (K-models only) 1 Instruction manual 1 Exploded drawing Check for damage to the tool, parts or accessories which may have occurred during transport. Take the time to thoroughly read and understand this manual prior to operation. Intended use Your D21805/D21810/D21815 percussion drill has been designed for professional drilling and impact drilling as well as for screwdriving applications. dO NOT use this tool under wet conditions or in presence of flammable liquids or gases. [. . . ] Always switch off the tool when work is finished and before unplugging. WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used. Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. [. . . ]