User manual DEWALT DW333K

[. . . ] There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. E When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. [. . . ] 115 V units have to be operated via a failsafe isolating transformer with an earth screen between the primary and secondary winding. Check for damage to the tool, parts or accessories which may have occurred during transport. â· Take the time to thoroughly read and understand this manual prior to operation. Should your mains plug need replacing and you are competent to do this, proceed as instructed below. If you are in doubt, contact an authorized DEWALT repair agent or a qualified electrician. Cut off the plug and dispose of it safely; a plug with bared copper conductors is dangerous if engaged in a live socket outlet. â· Only fit 13 Amperes BS1363A approved plugs fitted with the correctly rated fuse (1). â· The cable wire colours, or a letter, will be marked at the connection points of most good quality plugs. Before replacing the top cover of the mains plug ensure that the cable restraint (3) is holding the outer sheath of the cable firmly and that the two leads are correctly fixed at the terminal screws. Your jigsaw DW331K/DW333K has been designed for professional cutting of wood, steel, aluminium, plastic and ceramic material. B) The tool-free blade exchange system ensures quick and easy changing of saw blades. Insert the saw blade into the blade holder (7) guiding the back of the blade into the groove of the guide roller (8). To remove the saw blade, fully retract the blade latch and pull the blade out of the holder. Saw blades Blade type Fine-toothed cutting blade Coarse-toothed cutting blade Metal cutting blade Applications for smooth straight cuts for fast straight cuts for ferrous and nonferrous metals Flush cutting blade* for finishing off cuts up to a wall or edge. Never connect the live (L) or neutral (N) wires to the earth pin marked E or . For 115 V units with a power rating exceeding 1500 W, we recommend to fit a plug to BS4343 standard. If an extension cable is required, use an approved extension cable suitable for the power input of this tool (see technical data). F) The dust extraction adaptor (17) in combination with the dust extraction shroud (18) helps extracting the dust from the workpiece surface, when connected to a suitable dust extraction system. â· Place the dust extraction shroud (18) onto the finger guard (6) until it clicks in place. When appropriate, connect a dust extraction system designed in compliance with the applicable directives regarding dust emission. Do not use a dust extraction system without proper spark protection when sawing metal. A) The sawdust blower conducts an adjustable stream of air to the saw blade to keep the workpiece clear of sawdust during operation. [. . . ] Use a cooling lubricant (cutting oil) to prevent overheating of the saw blade or the workpiece. Optional accessories Consult your dealer for further information on the appropriate accessories. The following replacement blades are available: - DT2048 Fine toothed cutting blade - DT2075 Coarse toothed cutting blade - DT2160 Metal cutting blade - DT2074 Flush cutting blade* * Not available in all countries. Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. [. . . ]