User manual DEWALT DWE560K

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DEWALT DWE560K. We hope that this DEWALT DWE560K user guide will be useful to you.


DEWALT DWE560K : Download the complete user guide (7211 Ko)

Manual abstract: user guide DEWALT DWE560K

Detailed instructions for use are in the User's Guide.

[. . . ] INSTRUCTION MANUAL DWE560-XE, DWE565-XE 184 mm (7-1/4") CIRCULAR SAW Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. [. . . ] Make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut. NOTE: The 20 mm side of the inner clamp washer (O) MUST face outward toward the blade to fit blades with 20 mm arbors properly. Place outer clamp washer (N) on saw spindle with the large flat surface against the blade and the wording on the outer clamp washer facing you. Thread blade clamping screw (J) into saw spindle by hand (screw has right-hand threads and must be turned clockwise to tighten). Depress the blade lock (C) while turning the saw spindle with the blade wrench until the blade lock engages and the blade stops rotating. NOTE: Never engage the blade lock while saw is running, or engage in an effort to stop the tool. To loosen the blade clamping screw (J), depress the blade lock (C) and turn the saw spindle with the blade wrench until the blade lock engages and the blade stops rotating. With the blade lock engaged, turn the blade clamping screw counterclockwise with the blade wrench (screw has right-hand threads and must be turned counterclockwise to loosen). Clean any sawdust that may have accumulated in the guard or clamp washer area and check the condition and operation of the lower blade guard as previously outlined. Select the proper blade for the application (refer to Recommended Blade Types under Blades). Always use blades that are the correct size (diameter) with the proper size and shape center hole for mounting on the saw spindle. Always assure that the maximum recommended speed (rpm) on the saw blade meets or exceeds the speed (rpm) of the saw. Follow steps 1 through 5 under To Install the Blade, making sure that the blade will rotate in the proper direction. LOWER BLADE GUARD WARNING: The lower blade guard is a safety feature which reduces the risk of serious personal injury. Never use the saw if the lower guard is missing, damaged, misassembled or not working properly. Do not rely on the lower blade guard to protect you under all circumstances. Your safety depends on following all warnings and precautions as well as proper operation of the saw. Check lower guard for proper closing before each use as outlined in Additional Safety Rules for Circular Saws. If the lower blade guard is missing or not working properly, have the saw serviced before using. To assure product safety and reliability, repair, maintenance and adjustment should be performed by an authorized service center or other qualified service organization, always using identical replacement parts. 5 LOOSEN Your saw is equipped with a carbide tipped saw blade for long life and efficient cutting. Setting the saw at the proper cutting depth keeps blade friction to a minimum, removes sawdust from between the blade teeth, results in cooler, faster sawing and reduces the chance of kickback. [. . . ] Cleaning WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear AS/NZS51337 approved eye protection when performing this. WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DEWALT DWE560K




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DEWALT DWE560K will begin.

 

Copyright © 2015 - manualRetriever - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.