User manual DOMENA CS 6 ECOFIBRES

[. . . ] - Never immerse the machine in water or other liquids, not even partially. - If you fill the water tank without removing it from its compartment in the appliance, it is essential to unplug the appliance first. - Do not leave the appliance on stairways or other unstable areas where it might be knocked over. - Do not store the appliance out of doors or where there is a risk of frost. [. . . ] The tank is detachable : lift vertically to remove and place directly under tap for filling. Push the anti-scale cartridge firmly down in the tank and replace the tank cap. Never add products containing alcohol or essences (perfume, eau de Cologne, lavender essence…) to the water. When the green pilot light A stays on permanently, the appliance is ready to dispense steam. Press the “on/off” button on the pistol handle to ask for steam. To obtain steam quickly, select the maximum steam position on the steam regulator. €¢ If the green indicator light flashes during use, the supply of steam is interrupted. Wait until the indicator light illuminates again before requesting steam. Please note : After long periods of steaming there may be some residual steam emitted after pressing the steam “on/off” button to the off position. You may choose the steam output level for each cleaning situation by turning the steam regulator. The table of applications on page 16 will help you choose the best setting for your particular task. The programme option gives you 4 pre-set steam positions for automatic adjustment of steam power and temperature. When the programme option is selected, the steam output and the steam temperature are automatically regulated according to the position chosen (from 1 to 4). If you change position from 1 to 4 or from 4 to 1, the green pilot light A will flash until the preset values of steam output and temperature are reached. The appliance is ready to use when pilot light A stays green permanently. An optional iron is available which can be attached to the steam cleaning appliance Manual steam control Steam power can be adapted to different linen requirements by turning the steam regulator. EMC - Electronic Mineral Control The EMC system prevents scaling by continuously measuring the efficiency of the anti-scale cartridge and monitoring water quality. The EMC system automatically triggers warning light • Flashing red lamp B = the anti-scale cartridge will need to be changed soon. Continuous red light = the appliance will no longer produce steam : it is essential to change the antiscale cartridge, or use demineralised water. Changing the anti-scale cartridge • Press «on/off» button to off position, so that warning light B stops flashing. [. . . ] Press the steam button - Go to your local approved service dealer The machine makes a - There is no water in the reservoir noise. - Other - Fill the reservoir - Insert the reservoir and replace the tank cap - Go to your local approved service dealer The supply of steam is - Long periods of steaming interrupted - Wait until the indicator light illuminates again before requesting steam. MAINTENANCE • To clean the body of the appliance, simply use a moist cloth. The natural disposal of these elements may trigger harmful effects on human health and the environment. [. . . ]