User manual DOMENA CX 30

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DOMENA CX 30. We hope that this DOMENA CX 30 user guide will be useful to you.


DOMENA CX 30 : Download the complete user guide (1425 Ko)

Manual abstract: user guide DOMENA CX 30

Detailed instructions for use are in the User's Guide.

[. . . ] The packaging and instructions books use materials which are 100% recyclable. € This machine should only be used for its intended purpose: ironing and pressing. € Do not use the iron if it is damaged, if it leaks, or if the power cable is damaged. [. . . ] Remove, shake it for a few seconds and wait for the resultant colour change (approximately 1 minute). 2 or more mauve squares : we advise you to use distilled water for irons. Never add products containing alcohol or essences (perfume, eau de Cologne, lavender essence…) to the water. It is not necessary to switch off or unplug your ironing centre when refilling. Insert the cartridge as shown, lining up the tube with the mark on the reservoir. To obtain steam, the anti-scale cartridge must be inserted into the water tank. 500478517_Brochure_CX30 2/09/08 13:36 Page 25 THERMOSTAT ADJUSTMENT • We recommend that you iron articles in the order indicated on the iron's thermostat dial so that the temperature gradually increases. € To use steam please ensure that the thermostat dial is set within the 2 and 3 dot settings. The volume of steam increases gradually as you turn the control knob towards the maximum. € At maximum setting, there is an initial burst of steam lasting for several seconds. To repeat this process, wait for a few seconds to avoid any risk of spotting. Please note • Because of the high steam output rate, there is no need to continuously press the steam button. Pressing the button briefly and frequently will enable you to control the quantity of steam, in order to obtain professional results. € If the iron is used intensively, steam may continue to be produced after the steam button has been released and water may appear on the iron holder. € You should turn the steam output dial to the middle setting when - the unit is used for the first time, - the water tank has been refilled, - the anti-scale cartridge has just been changed. ECO FUNCTION It is recommended that you use the ECO function when the garments are only slightly creased, have come out of a tumble dryer and whenever you think suitable. In this way you will be obtaining maximum economy in the use of water and electricity, up to 50% in electricity and 70% in water. The illuminated pilot light will confirm that this mode is operational. [. . . ] - The anti-scale cartridge has not been inserted - The pilot light ANTI-CALC flashes - Other Water is produced - The iron soleplate is not hot enough with the steam. - Over steaming - Water condensation in the hose - Other The machine makes - There is no water in the reservoir - Fill the reservoir. - Other Indicator lit - Auto-Stop activated after 10 minutes of non-use - Press the trigger : the pilot light goes off and the appliance starts heating again. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DOMENA CX 30




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DOMENA CX 30 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.